3D PLUS is a world leading supplier of advanced high density 3D microelectronic products and bare die and wafer level stacking technology meeting the demand for high reliability and very small size of today’s and tomorrow’s electronics. 3D PLUS is recognized as a high performance innovator in the design and manufacturing of miniaturized 3D modules for more than 20 years. With a capability of stacking up to 10 semiconductor devices within 1mm, 3D PLUS ultra-low profile modules are unique.
4D Concept offers a range of solutions, products and services in the field of technical content management, to help you create, use, publish and distribute all your cross-media content. ADAM Suite: Come on board our cross-media publishing S1000D and ATA2300 software. The ADAM software suite enables you to produce, manage, publish and distribute your technical documentation. It easily adapts to your PLM tools via configuration or API to create, manage and make the most of data in S1000D v4.1 or ATA2300 or your standard format.
A & T Aerospace provides services and technical assistance in: • Structure Works and Cabin • Installation, assembly, A/C sub-element • Aircraft site: Repair, Modification, Maintenance, finishing & completion • Repair: Part 145-FAR 145 Approval (rating C8 - No. FR.145.0679) We work on client site in France and abroad.
Centralization and outsourcing of MOD procurement, Supply Chain Management, Research and Development of technical solutions. Our products are used by the logistical support services and Operational Maintenance for the following equipment: - Civilian and Military Aircraft - Military Communications - Electronic Warfare. Aircrafts / helicopters: A400M - C130 - C135 - EUROFIGHTER EF2000 - HAWK – MC130H - MIRAGE 2000 – PUMA - RAFALE – RQ4A - TIGRE. We also offer solutions for protecting sensitive sites. Our standard supports, certified EN 9120 and ISO 14001 are the pillars of our commitments to our partners.
Full service combining high precision machining, grinding, deburring and superfinishing, JIT kitting and supplier management (heat & surface treatment) and assembly, wiring, integration and test of critical mechanical, electro- or hydromechanical Aeronautic & Defense sub-assemblies.
Since 1986 AB Corporate Aviation, based at Paris Le Bourget airport, offers On demand Private Jets Charter flights, Air Taxis, Rent a Business Jet, Ad hoc Executive Air Charter: for your business trips, special events, private flights. Billing flight per flight without subscription or investment. Flexible, efficient and profitable, our clients enjoy significant advantages: reach their final destinations in the schedules of their choice, without correspondence or waiting. Contact us to find out more.
Design and construction of MEKABOY AEROSPACE wheelhandling systems and MEKABOY Kombi for the maintenance of wheels and brake blocks. Conception of any specific equipment for maintenance on line.
Specialist since 1963 in the processing of virgin or filled PTFE.
Subcontractor for aeronautical parts and tools
ADSoftware is a 17 year old IT company based in France, Thailand, Brazil and South Africa. The company has developed a fleet management system and logistic package called AIRPACK which meets the needs of aircraft and helicopters operators, as well as MRO and CAMO centers. The strength of ADSoftware is the simplicity of its product (Microsoft Windows ready, Web-enabled, multilingual, 5 days training), its 24/7 online technical support and extremely competitive pricing.
AGILITEAM GROUP MEMBER Machining and mechanical presicion. Screw machning. Complete deliveries and supplies. Strong Family capital. High growth capacity. Small and very small dimensions. Stainless steel and hard metals specialized. Integrated ERP Air Supply Aeronautical performances prerequisites (OTD-OQD)
Supplier and Converter of high performance materials for aeronautics, defense and space :Chemicals custom packaging (Glues, Paints, Oils, Lubricants...)Die Cutting, converting and distribution of technical adhesives tapes and films (Tedlar®, Kapton®, ...)
Adeole is a company specialized in business applications by drone in the sectors of building, public works and civil engineering. We are also distributor of vtol drones for civil and military applications.
Your ideal partner in machined parts smaller than 700 mm. Certified to EN 9100 - 2016 and approved by manufacturers, FGM Group works and protects your parts according to all specifications.
Electronic assembly and subassembly subcontracting - Wiring and Winding Aeronautics - Space - Military - Marine - Railways - Industrial - Medical Wiring : Racks - Cabinets - Cables - Wiring bundles - Semi-rigi - Wrapping Circuit board wiring : Manual -
Specialized in manufacturing and fine sheet metal work, Aéro 13 company will please all you needs in aeronautics industry especially in civil or military aviation. Whether it is on our production locations or on your own construction site, our expertise includes services and cutting-edge technologies to realize all your projects.
AERO NEGOCE INTERNATIONAL distribute and stock aeronautical hardware such as screws, bolts, lamps, connectors, seals,…
AEROCAMPUS is a Part-147 approved aerospace training campus and is the only one of its kind in Europe which offers all training courses for all levels and all types of students. AEROCAMPUS provides initial training, from vocational A-levels to advanced vocational training certificate, either through educational training or apprenticeship, and continuing vocational training in aircraft maintenance.AEROCAMPUS is situated near Bordeaux and can be used to host conférences or seminars.
Aeronautical Cluster which groups together 97 companies in the Center Region Development strategy is based on Research and Innovation, Economic, Development and Social. Fields of activities : Airborne systems and Equipment Cabin amenities Composites materials - Elastomer and plastic Aircraft disassembly and recycling Mechanical subcontracting, metallurgy, surface treatment and special process Electronic and automation Global subcontracting Assembling - Integration and special machines
AEROSION is the specialist of EDM by cutting wire, machine and fast drilling. Machine park: 20 machines to electro erosion to digital controls including 1 palletizer for large series. Precision of +/-3 microns machining of all conductive materials (hardened steel, aluminum, carbide, Chrome, Cobalt, copper, Graphite, stainless steel, Nickel, titanium, Inconel, stainless steel, gold) aerospace industry EN 9100 Certification and accreditation according to standard DMP66 SNECMA.
Aerospace Cluster Auvergne-Rhône-Alpes is a non-profit organisation (Association Loi 1901). It brings together aerospace companies, research laboratories and training centers located in the Auvergne-Rhône-Alpes region (France) in a network (200 members).
HIGH PRECISION MECHANICS, MACHINING AND ASSEMBLIES With 40 years of experience, we are precision machining and assembly specialists mainly for Aerospace markets. Besides our headquarters based in Merignac (France), our manufacturing capabilities are located in Portugal, Tunisia and Morocco. AIR SUPPLY connected, we are able to organize our workflow to offer the best supply chain solution.
Advanced expertise and services for Defense, Aeronautics and Space * simulation and visualization of systems - 3D modeling, terrain for simulators - software distribution * Retrofit of calculator and simulators based on COTS * Deep learning, images processing for Earth observation domain * High performance calculation (HPC) solutions, C/C++ code optimization * User experience design + user interface * Service and mission platform for drones * training languages programming
Agilium is a software publisher and integrator. Our solutions are dedicated to bring continuous improvement and operational excellence within organizations. Agilium softwares are based on managing business processes ; we strive to increase productivity and profitability while promoting collaborative work.
With more than 25 years of experience in surface preparation and application of paint products, AGOSTINELLI Establishments are qualified for all the actors of the armaments (MBDA, NEXTER SYSTEMES, SAFRAN ED, THALES ...) and Meet the civil aeronautical specifications. Our know-how translates into the quality of our services, our turnaround times and also the service we provide to our customers.
AIRBUS Développement, is a smal french susidiary of AIRBUS SAS The subsidiary have been created in 1996 after the first Gulf war crisis in order to support the economic activity of SME’s and job creation. The structure is light with only 5 regional directors to pilot the activity. 1300 development contract have been signed with startups and industrial SME's.
The Algo'Tech & Inodex 3D partnership offers a unique solution to design and support industrialization and production of wiring. - Design wiring diagrams and harnesses with powerful CAD functions - Access to complete libraries of components and processes - Develop manufacturing sequences enriched with your processes - Ensure the tracking of your modifications and productions in real time - Drawing your 3D beams and editing your form boards
ALPES USINAGE is a supplier of mechanicals flying components in Aeronautics for 20 years. We specialize in industrialization and manufacturing of components for the following applications: -Hydraulic equipment and systems (fittings, plugs rings, washers) -Bearing equipment (bushings, rod ends) -complex parts and assembly parts ALPES USINAGE manages the global supply chain including the purchase of raw material, sub-components for assembly parts, treatments and non destructive testing. ALPES USINAGE is famous for its OTD of 95%.
AM GROUP IS SPECIALISED IN TWO DISTINCT PROFESSIONS IN AEROSPACE INDUSTRY : 1- ARV : BALL LOCK PINS MANUFACTURER IN FRANCE CONTACT : email@example.com ARV is highly specialized in the manufacturing of all kinds of QUICK RELEASE PINS, and also, and in particular of non-standard QUICK RELEASE PINS at very competitive price and short delivery time : •CATALOG OR CUSTOMISED OFFER •« DETENT », « SINGLE ACTING » or « DOUBLE ACTING » PINS •NATIONAL AEROSPACE STANDARD MS NAS 1332 OR EUROPEAN EQUIVALENCE. •ATTACHMENTS : Lanyards, Tabs, Rings, Warning Streamer, etc. ISO 9001. THE SHORTEST DELIVERY TIMES. 3D CATALOG ON TRACEPARTS: www.tracepartsonline.net/ws/ARV 2- ALPHA NUM / ARM : SPECIALISED IN AERO TOOLS MAINTENANCE AND MANUFACTURE: TOOL DESIGN, MANUFACTURE, REPAIR AND MAINTENANCE OF MOTOR AND AIRCRAFT TOOLS. OUR MAIN CUSTOMER IS AIR FRANCE INDUSTRIES.
ALPHA-RLH is a French Competitiveness Cluster specialized in Photonics and Microwaves technologies: Photonics-Laser (laser sources and processes, optical components, instrumentation) and Microwaves (integrated electronics, radio-communication systems, radar systems). ALPHA-RLH supports companies and laboratories in the set-up, expertise and financing of innovative projects, provide technical expertise and access to a wide network.
Aerospace cluster gathering 50 industries in Hauts-de-France,ALTYTUD is networking the various players within an efficient and concrete business approach.
With 20 years of experience, AMC Aviation is an independent aeronautical company. We offer an important range of services to airlines & MRO such as : MRO, CAMO, LOGISTICS, SALES & PURCHASE, QUALITY & SMS SOFTWARE SOLUTION, EASA PART 145 at CDG, ORY, LIL, NTE, LYS, BKO, AVIATION CONSULTING, EASA CAMO SERVICES & EASA TRAINING
Thanks to its 14-machine production tool, AMECA has been designing and manufacturing thread inserts for 40 years in France. Its own design office creates the fixing solutions you need, whether standard or customized, simple or complex. AMECA offers a wide range of thread inserts, as well as their repair kits and manual and automatic installation tooling systems. This proven know-how in the field of thread inserts allows AMECA to continuously develop and expand its product range in order to adapt its offer to the innovative needs of the market and to provide the best possible assembly solutions. You will also find inserts for sheet metal and plastics, key and self-tapping sleeves, embedded nuts and welding and crimping studs, as well as various fasteners. ISO9001 and EN9100 certified, AMECA supplies 20 million parts annually to the aerospace, defence, energy, electronics, special machinery, transport, medical and food industries worldwide.
DESIGN & PRODUCTION OF FASTENING AND BINDING ELEMENTS THROUGH HOT FORGING, MACHINING AND THREAD ROLLING. Hot forged, special precision bolts and nuts, cold thread rolling, engineered components, sub-assemblies and functions. FIELDS OF ACTIVITY. •Army an
Since 1988 we have specialized in the production of parts, composite molds and tools We realize a benefit from design to part production
We are developing a multipurpose light aircraft designed to improve your aerial work activities and specialized operations (SPO).
AQLE intervenes with his(her) customers in: * the cabling of electronic boards, the wired cabling or the integration of équipements. * The project management: of the prototypage has the series, for smallest or most average series * The realization of the purchases of components, the press made, the tests, the varnishing(private viewing) or the déverminage.
For more than 30 years, AQUITAINE ELECTRONIQUE has developed its know-how as a turnkey supplier to optimize its services in a global process, to satisfy its customers: Study, Design, Manufacturing, Industrialization and Integration of functional assemblies in the fields of civil and military aeronautics, armament and industry.
Our company assists small to mid-size industries in the Aerospace, Defense and Automotive areas. Our specialized consultants support you with pragmatism and adaptability to take into account your strategic goals and issues, in the following areas: - RECRUITMENT of profiles on occupations in tension - HR AND TRAINING CONSULTING from the audit to the implementation of customized action plans - ENGINEERING SERVICES for short to medium-term assignments.
ARMOR designs and produces custom-made materials under the Kimya brand. We offer a solution for manufacturers who wish to integrate additive manufacturing into their finished product production process or for rapid prototyping…
ARTS Energy is a global player in the design, industrialisation and manufacturing of electrical energy storage systems. ARTS Energy's products and solutions are based on rechargeable Lithium-ion (Li-ion), Nickel Metal Hydride (Ni-MH) and Nickel Cadmium (Ni-Cd) batteries for professionals. Our mission is to satisfy the application needs of our professional customers, permanently, everywhere, with quality energy storage solutions and local customer service. Thanks to our expert staff, passionately committed to the rechargeable battery, our industrial facility centred on quality, service and cost control and our international sales force, ARTS Energy meets current and future needs to offer our best solutions. We are ISO9001 - ISO 14001 - PART21G - AEO certified. As a battery solution provider, we manage complexity for the simplicity of our customers!
ART-TECH specialises in the machining and shaping of parts in small and medium-sized batches . The compagny also provides technical assistance for the development of new products with its custumers .
Complete achievements of sets and electronic subsets. Supply. Wiring cards traditional electronic and CMS. Wired wiring and Wrapping. Avionics harness. Test mobile probes. Study and realization of inductive components LF, LV, HF, HV (linear, toric). Molding (transfer, impregnation, coating and injection vacuum).Tests, burn-in.
ASB Aerospatiale Batteries is a world leading company which specialises in the research, design and manufacture of Thermal Batteries, with cutting edge technologies and enhanced reliability performance. ASB products are recognized worldwide for their excellence and optimization to the customer requirements. Due to their inherent technological advantages, our thermal batteries are a factor in the success of all current major aeronautical, space and defence projects across the world.
ASTech Paris Region is the aerospace competitiveness cluster for the Paris Region. With an exceptional talent pool, a historic expertise and over 100,000 jobs, ASTech Paris Region represents France’s leading aerospace R&D region (43% of the national aerospace R&D budget), bringing together over 28,000 researchers. ASTech Paris Region already has over 300 partners which include the largest national aerospace groups, the most renowned training and research institutes and many innovative SMEs. The birthplace of the national aerospace industry, incorporating world leaders in their fields (business aviation - Dassault Aviation, space transportation - ASL, Propulsion - Safran), the ASTech cluster is structured around 6 themes aimed at developing the economy and employment in the Paris Region
We can provide you with tailor-made, all-in solutions combining efficiency and technical process. Specialist in technical, precision, injected parts between 0.005 g to 1 Kg in advanced, engineered thermoplastic materials and thermoset materials. Over-moulding of various types of inserts: electrical contactor, nylon fabric, metal inserts…. Design and production of moulds for injection. Finishing and assembly operations. Run capacities: from 50 parts to several million parts per year. Just-in-time management and expedition over the world. Certification : EN9100 / ISO9001 / ISO14001.
AstroNova Aerospace is the preeminent worldwide supplier of airborne printers. These products print weather and airport maps, communications, and other critical flight information. With more than a decade of designing ruggedized products, AstroNova ToughWriter® printers offer the lowest size, weight, and power requirements; highest-quality text and graphics; plus industry-leading print speed. A global leader in the ruggedized printer industry, AstroNova’s Aerospace products include: - High-speed ToughWriter printers - Miltope printers - RITEC Commercial printers - ToughSwitch Ethernet switches Airborne printer paper The innovation of our ruggedized aerospace products, combined with highly responsive technical support, makes it easy for airframe and avionics manufacturers to integrate these systems and provide end users with high-speed, high-quality data handling and visualization.
EASA/FAA/TCAC/GCAA 145 certified MRO EXPERT For OXYGEN/EVACUATION SYS/FIREX/ELT/LIFE RAFT LIFE VEST FLOATS EXCHANGE SUPPLY MRO INVENTORY. SATELLITE 8 CLASS ESA CLEAN ROOM for electric Xenon propulsion tank sub assembly test and validation. (Systems and pipings)
Our core business is the mechanical machining of thin and complex parts by material removal. Machining skin, shim, shim trapez …
The AGS Groupe, is a supplier of solutions, expert in additive manufacturing, hybrid laser welding, high speed machining, EDM, laser cutting and high-pressure water jet cutting, sheet metal work and mechanical welding, assembly.
For more than 20 years, AUSY, an international consulting and engineering group, has been involved in international aeronautics and space programs for European customers. As of 2019, AUSY employs over 7,000 people at more than fifty sites in Europe, the United States and Asia. It combines consulting and expertise, from the production of applications and systems up to the outsourcing of on- and off-site activities.
The Group's service offer is comprehensive and covers digitalization and Industry 4.0, critical systems engineering (on-board computers, secure telecommunications systems, cybersecurity), mechanical engineering (calculation and design of aerostructures, cabin design), and software and system engineering (satellite ground segment, test facilities and information systems).
Auvergne-Rhone-Alpes Enterprises provides services to foreign investors by attracting new investment projects and local companies in their competitiveness on international markets. Auvergne-Rhône-Alpes, the 1st industrial region of France, is a leading territory in Aeronautics. 350 companies (Michelin, Aubert&Duval, Constellium, Dassault Aviation, Hexcel, Safran, SKF, Thalès…) are working on Innovative materials, Advanced Embedded Systems, Advanced technologies ‘Factory of the Future’ and M.R.O. Solutions
AVIATUBE, an independent company, is specialized in the development of high-performance technical solutions for hard aluminium alloys by spinning and drawing for the aeronautics, sports & leisure, transport and industry & defence sectors.
AVIGNON CERAMIC designs, manufacture and sells ceramic components for use under extreme conditions : very high temperature, inert, unalterable, agressive chemical environment, fusible. Process : CIM - 3D printing - Pressing - Extrusion - Pouring Applications : Aerospace, Energy, Medical, Automotive and other industries. With its Innovation & Development Team, Avignon Ceramic is committed to supplying its customers with products meeting industrial evolution and in full respect of sustainable development.
AVNIR Engineering is a leading engineering Research and Development with major European accounts of Aeronautics. Our experts involved in technical assistance in the offices of preliminary studies and testing services from our customers in the field.
AVNIR Engineering is a leading engineering Research and Development with major European accounts of Aeronautics. Our experts involved in technical assistance in the offices of preliminary studies and testing services from our customers in the field of m
Axsens bte is a consulting firm of operational excellence of 30 consultants. Born in 2010 from the merger of the Axsens agency, created in 2005 by Aymeric de Valroger, specialized in Industrial Supply Chain, and the BTE (Bureau des Temps Elémentaires) association created in 1938, it benefits from a wide range of offers advice and training. For more than 15 years, our mission has been to take up, with our clients and consultants, the industrial challenges of today and tomorrow around three key values: teamwork, integrity and initiative. With more than 300 customers and thanks to our expertise, we lead projects in various sectors such as Aeronautics (Airbus and Safran), Health (Sanofi), Transport and Logistics (Daher and Geodis), Building (Eiffage) and Distribution (Flurin Ballot, Yeo Frais). Our customers are sensitive to the extent of our offer, which allows us to build a real relationship of trust. This is how 70% of our missions are renewed. Working alongside Axsens bte is above all benefiting: • A firm on a human scale • Multi-language consultants and trainers • Guaranteed quality work • A permanent watch on the new needs of the market • Field consultants with your teams In 2017 Axsens bte widens its horizons by merging with the Lyon consultancy firm BELIER ASSOCIES and thus increases the number of offices to three: Toulouse, Paris and Lyon. International openness, particularly in Germany, is at the heart of our development strategy in the coming years.
AXSYS INDUSTRIES is specialised in the manufacturing of precision machined parts as well as weldments, from prototype to series.
For over 70 years, BMI has been designing and manufacturing premium vacuum furnaces for the heat treatment of steels. Our range of standard furnaces cover the following applications: oil/gas quenching, tempering, annealing, stress relieving, ageing, cryogenic treatment, etc... Our specific furnaces allow you to make high temperature brazing treatments, aluminium brazing, sintering, degassing as well as other specific processes such as IVD and APV. Our vacuum furnaces are available in a wide range of sizes and may be coupled with thermochemical treatment furnaces like low pressure carburizing, low pressure nitriding and plasma nitriding. Moreover, our heat treatment solutions comply with the requirements of the most demanding sectors (aerospace, medical, energy…) in terms of technical specifications and regulatory standards (AMS, BAC…).
BAC Bobinage is a specialist in custom winding - We manufacture components on self - transformers - sensors - planars - etc ... low and medium voltage for the supply of electronic and electrical systems. - We manufacture and assemble electromechanical safety subassemblies for the aeronautical and railway sectors. - We industrialize and produce stator type electromechanical elements for the Aerospace, Defense and Industry sectors. With more than 25 years of experience in the winding world, BAC Bobinage is the ideal partner for the development of your new projects.
Forging and machining of parts in aluminium, stainless steels and special steels until 1.5 kg, and in steels until 5 kg
BENE SOLUTIONS operates in 2 sectors of activity: MACHINING with the realization of projects and INDUSTRIAL INTEGRATION for the study and realization in the fields of tools, special machines, cobotic/robotics and assembly lines.
Established for more 52 years in the field of mecanical engineering
Importation, processing, cutting and coating of technical adhesive tapes. Masking products, temporary protection, electrical insulation,high temperature masking tapes. Raw material, glues, silicone, sealant, lubricants, abrasives and other consumable. All range of tapes (3M, SCAPA,NITTO, TESA,...) AIRBUS GROUP, THALES, DASSAULT, DAHER, ARMEE DE L'AIR, SNECMA,SABENA.
The innovative deburring and polishing process, MMP technology®’s selective removal of roughness enables to obtain and control the super-finishes of surfaces at a level of homogeneity and reproducibility never reached.
The world's leading metallurgical services provider to the international aerospace industry
Family owned company since 1975, HBP Group is your partner for R&D staff. We support our customers from collaborative design to industrialization and we bring real solutions to their issues. HBP is a dynamic group, in France and abroad, with consolidated sales of 17 million euros.
Industrialization and manufacturing of sheet metal parts and equipment for Aeronautics, Space and Defence. BRONZAVIA manufactures parts, assemblies and equipment in aluminium and hard metals.Parts are cut and then formed by stamping, embossing or sheetworking, assembled by welding, brazing or riveting,and controlled by CND, tridim or 3D scanner. BRONZAVIA relies on the skills and experience of its teams. Its numerous special processes are qualifed by the main contractors: AIRBUS, DASSAULT, SAFRAN, UTC....
Planning, manufacturing, installation and servicing of large doors for hangars of capacity Business Jets and Helicopters up to Wide Body and Military Aircrafts (like A400M), as well as industrial doors for workshops, material access or car entrance into halls or garages
C3 Technologies is specialized in the production of high performance composite moulds and parts intended for use in different sectors such as boating, aeronautic, sports and leisure, research. From samples for material characterization to serial production going through prototyping and pre-production phase, we support you in all your composite projects.
The Campus Aéronautique Auvergne Rhône Alpes is a network of 16 establishments offering initial training courses (school status, student and apprentices) and continuing in line with the needs of companies in the aeronautical industry. Labeled in 2013 "Campus trades and qualifications" by the Ministry of Education, Higher Education and Research, it allows young people to move from a logic of structure to a logic course. Today the campus trains more than 750 learners a year and has 32 courses from CAP to PhD.
Our expertise ... quality and reactivity for the achievement of your electronic subassemblies. EN9100 certified, we design and manufacture embedded electronic boards and harness and bench tests.
CBP is located in Sartrouville, near Paris, we are specialised in the production of sliding bushings, bimetal bearings, sliding thrust washers, sliding guides and the PYDANE ® range (316TI Stainless Steel PTFE Bushings…) We are working for different activity area such as Automotive, Aeronautics, Aerospace, Railway, Marine, Electrical energy… Our adaptability and responsiveness, combined with the flexibility of our production unit, allow us to meet all your requests, and more specifically the requirements of small and medium-sized series in a short time. CBP is certified ISO 9001 Quality and ISO 14001 Environment
CECLA METAL PROCESS is specialized in cooling solutions for electronics. Technologies used by CECLA METAL PROCESS are: - Heat Pipes - Liquid Cold Plates - Heat Sinks CECLA METAL PROCESS is leader in electrical insulation of power components.
The CEEVO is the Val d’Oise Economic Development and Attractiveness Agency (Paris- Ile-de-France). It promotes the economic assets of the territory, its companies and the initiatives developed by local stakeholders. The CEEVO provides supports for all those looking to create, develop, or establish their company in the Val d’Oise. It has offices in Cergy-Pontoise (head office), at Paris-Roissy-Charles de Gaulle Airport, in Osaka (Japan) and in Shanghai (China).
CEPM INDUSTRIE PROVIDES INDUSTRIAL SOLUTIONS FOR DESIGN, SPECIFIC AERONAUTIC TOOLING / OPTICAL BENCH & SPECIAL MACHINES.
With its team of passionate and pramatic engineers, CEREBRUM is the multi-physics modeling ans virtual prototyping specialist integrating seamlessly in MBD workflows. * Expertise in co-simulation 1D-3D. Capability of component characterization to obtain pertinent numerical models and precise results. *Creation of specialized software to secure designs and reduce development time *Methodology and application to pilot your numerical model with PLCs or any controllers that will be installed on your machines. SKILLS : *1D : Systems modeling, multi-physics (mechanic, fluid, electricfication, battery) *3D : Structural analysis : FEM, multi-body... CFD : Aerodynamics, hydraulics, thermics... *Co-simulation 1D-3D *Control systems : design, tuning, MIL, SIL, PIL *Reverse engineering : Components characterization (servo-valve, electric motor, pump, solenoid, mechanical parts...) *Tools and specific applications : Pre/post processing,
CERTIA Group leader in the design and production turnkey of test benches for the aerospace, automotive and defense industries. CERTIA GROUP CERTIA UK CERTIA Noisy Le Grand – France : Mechatronics Engineering and test benches design Office SHYMAT - Saint Ouen Aumone – France : Electrical and hydraulic engineering design office CERTIA R&D – Dar-El-Beida - Algeria: R&D Mechatronics Engineering and CERTIA Group representation Maghreb and middle east PANOPTES - Noisy Le Grand - France: Health monitoring of industrial and consumer installations design office Aeronautical products: For integrator : Iron Bird test benches For component developers : tests benches for sub-systems and systems (landing Gear – Actuators for FCS …) For MRO: multi CMM benches, component test benches (actuators, pumps, servo controls, servo-valves, gearboxes, ...) Developments of control software packages for test benches Development of tools The CERTIA Group is a research and development center at your service: Modeling and dynamical simulation studies, virtual test platforms Feasibility and expertise on mechatronic systems Real time controllers Diagnosis and Health monitoring of your facilities (PANOPTES)R&D and R&T partnerships
Founded in 1976, CGI is among the largest independent IT and business consulting services firms in the world. With approximately 77,000 professionals across the globe, CGI delivers an end-to-end portfolio of capabilities, from IT and business consulting to systems integration, outsourcing services and intellectual property solutions. CGI works with clients through a local relationship model complemented by a global delivery network that helps clients digitally transform their organizations and accelerate results. With annual revenue of C$11.5 billion, CGI shares are listed on the TSX (GIB.A) and the NYSE (GIB). Learn more at cgi.com.
Stocking and distribution of alloy steels, stainless steels, copper alloys, nickel and titanium superalloys, aluminium alloys, plastics. Bars, sheets, plate, tubes, wire, forgings
The world of industry and particularly mechanical manufacturing is changing and digitalizing. As a specialist in the simulation of CNC machine tools, we put our know-how and expertise at the service of manufacturing companies. With 30 years of experience, we support our customers to meet their competitive challenges. The security and optimization of production equipment are at the heart of our concerns.
Highly specialized in aerospace and medical polishing fields, we are able to offer you our services for the realization of all your needs from finition to final control. Our certifications EN-9100 (Aerospace) and ISO 13485 (Medical) reinforce our quality of service and our ability to react.
A Recognized know-how in electrochemistry and chemistry Mastered techniques of CHROME DUR INDUSTRIEL: Chromium deposit (chrome VI or Chrome III) Electrolytic polishing, Passivation, pickling, degreasing, Deoxydation, Degauss, peening; Accredited NADCAPO since 2009 and Certified ISO 9001, EN 9100 A specialty of complex parts: cylindrical, of revolution, bores, Grooves, threads, CHROME DUR INDUSTRIEL is present in many markets, Aerospace, nuclear, armaments, medical, precision mechanics...
Definition, development and production of optronics and laser equipment, adaptive optics and optical coatings for defence, industry and space
CIR and its 12 branch offices in the South of France is, since 1933, located in Toulouse, the heart of European aeronautical industry. Its team of specialists and its technical skills in the aeronautical world are at your services. Dedicated and consigned stocks, DLF, KANBAN, adapted delivery rates, deliveries on your production site, kitting, customized packaging and labelling, consolidation/outsourcing purchases. Our expertise : Technical solutions/researches, technical equivalences...
Incorporated in Paris Area in 1964 Clabaut supplied aeronautic and aerospace rank 2 manufacturer as metal sheet cutting, bending, welding and painting. We are ISO9001/2008 and EN9100 certified. Thanks to our client portfolio and their international projects we do business world wide in supplying assembly parts or spare parts for their clients. We do co-development, prototyping, pre series and series. We internally controlled parts with the latest available measurement analysers.
Since 1987, Clip Industrie relies on its values and experience to offer ERP solutions that best meet the needs of micro, small and medium sized entreprises. In 2013, Clip Industrie acquired HELIOS ERP, a solution specialized in the aviation and surface treatment industries. Clip Industrie centers its strategy on the quality of relationships with its clients, partners and employees. By integrating ourselves our solutions at our clients, we know that they will be well served and that our consultants will be a reflection of the quality and commitment of our company.
For 50 years CNI has been recognized as a key player in the design and manufacture of specific products based on metal in the Naval, Aeronautical, Offshore and Industrial Tooling sectors, as well as in Urban Planning.
The armed arm of the JOGAM Group in the fields of sheet metal and aeronautical boiler making, Coaéro offers a global range of industrial subcontracting services; Design and study of tooling, 5-axis laser cutting, mechanical cutting, sheet metal forming (bending, forming, stamping, rolling, elongation, shrinkage and elongation), heat treatment, assembly and assembly of subassemblies, TIG welding "Aeronautics"
Codica designs ans manufactures metal cables from 0.09 to 8 mm, cable transmissions and sheaths in medium to long production runs tailored to numerous applications involving moving (clutch, accelerator and brake cables) or fixed cables (holding, suspension, support and safety cables...). It works for markets as varied as equipment for aircraft,
Codifur EMS can boast half a century of experience, and has become a major player in the contract electronics manufacturing industry. Our 400 staff are here to meet your needs in the following areas: Research and new technologies with carefully selected partners in technical sectors where reliability is crucial, Complete project management, Large-scale development, co-development and design-to-cost, Manufacturing and test methods, Purchasing and supply chain management, PCB production (mock-ups, prototypes, pre-series and mass production), Complex integration of modules and finished products, after-sales service and in-service support.
R&T specialized in composite materials and process Advanced engineering Composite materials Design and calculation Laboratory dedicated to advanced process for composite Process simulation : Liquid Composite Molding, Hot Stamping, Textile Forming French R&D agreement (CIR)
Pays de Meaux: The East Paris aeronautics subcontracting cluster At the gateway to Paris (45 km) and in the immediate vicinity of the hub airports of Roissy CDG (25 minutes) and Le Bourget, our territory offers a strategic positioning for industries wishing to set up near the major aeronautics contract givers. By setting up in Pays de Meaux you can also be part of a network of aeronautics and airport operators.
Designer and manufacturer of fully equipped and customized cockpit panels also, keyboards, light applications and display units for civil and defense aircraft (fixed wing and helicopters).
COSE is a high technology SME, a first-tier supplier of government agencies and major groups in the aeronautics and defense sector. COSE develops, produces, integrates and supports its aerial observation and reconnaissance camera systems and other on-board equipment deployed in operational environments for 5 to 20 years. We provide training and logistics operations can be handled through NATO mechanisms. Our main products are: STRIKE is a stabilized mount for .5 bmg rifle on Helicopter. GlobalScanner and CAMELEON are very wide field and ultra high resolution aerial reconnaissance cameras. These cameras support and replace satellite means.
We offer our services on the manufacture of transmission components. Our machine park allows us to perform turning, milling, gear cutting, gear grinding, broaching, mortising and wire EDM operations. We are also equipped for the assembly of mechanical subassemblies. We perform our parts internally from A to Z (except heat treatment).
The COURBIS Group with its production plants in France, Slovakia, China and Brazil, certified ISO 9001, ISO 14001 and EN 9100 implements complex polymers and high-tech machining facilities to provide mechanical parts with high added value in all scopes of civil and military aviation. Direct supplier, rank 1 or rank 2 on the A320 and A350 program, Bombardier, Dassault; EADS, Airbus Helicopters, Bell, Agusta,...
Production and sales of moulded parts in rubber and technical compounds. Conception of sealing systems. EN9100 Manufacturing.
CRITT-MDTS is a testing, expertise and R&D laboratory specialized in metallic materials. It is NADCAP and SAFRAN approved for mechanical testing, chemical analysis and metallography services. It is also AIRBUS qualified for the same tests and for tests on coatings. It also supports you in your R&D projects, particularly those concerning wear and tear or friction issues. CRITT-MDTS is CRT certified and a member of the MICA Carnot Institute.
With its strong experience, as an innovating company, CSA offers a global solution to the aeronautical industry with its design office; it’s very large capacity workshops and its accurate controlling means. Its expertise and know-how let it compete in following fields :Complete machining/manufacturing of airframe components from aluminum to titanium. Metal moulds studying and manufacturing for composite materials, as well as hot stamping dies.
CTS Consulting & Technical Support operates at every step of Aerospace&Defense programs life cycle. From Preliminary design to Manufacturing engineering, from In Flight Service Support to ILS or NDT, our team of experts is acting on the field closer to its customers needs. AIRBUS, SAFRAN, CEA, Majors players trust our company. OUR SUBSIDIARIES: PARIS BORDEAUX NANTES TOULOUSE AIX
DANIELSON Aircraft Systems develops and commercializes drone propulsion systems using 'Heavy Fuel' diesel engines : TRIDENT The Trident Diesel UAV Propulsion System is a complete solution that has been specially designed from specifications drawn up by drone manufacturers and users. The technologies used in Trident, which have been tested and approved in-flight, offer new possibilities for UAV builders and users alike.
CNC machining of metal and plastic components used in aeronautics. Production of high value-added parts in a complete solution. DBC supplies Airbus, Safran, Bombardier, Crouzet, Saint Gobain. Turnover=18.9 M€ in 2018, 13% in aeronautics. Number of employees=115 people. EN9100 certified. Industrial plant of 7500 m² equipped with an AMR. 120 machinery high technology with following dimensional capacities: - Ø65mm in bar, - Ø200mm and 400x400X400mm in plots, - Ø5mm wire. CNC turning and milling: 3 to 5 axis machining centre, 5 axis continuous mill turn center, single spindle and twin spindle sliding/fixed headstock, multi-spindle. Traditional turning: single-spindle, multi-spindle and escomatic. Other equipment: laser engraving, camera control, assembly, robotic cell, press. An eco-responsible company.
Specialized high temperature insulation and fire shielding manufacturer for protection up to 1400°C. For more than 15 years of experience, DBM TECHNOLOGIE has acquired a premium level of insulation technology, from design to industrialization, from prototype to serial production.
DEBITEX specializes in : - Management of fluids, - Injection and filtration, - Fixed or mobiles mechanims, - Optical and nuclear instrumentation.
DEFI GROUP is an independent family-owned company, settled in 1957. Our 6 European plants (5 in France, 1 in Romania) and our US production plant (Cincinnati) all specialized in metal components industrialising and processing : cutting, stamping, assembly, tooling, machining, wire an tube forming, profiling.
Created in 2018, Delfox is an AI-first start-up which sets itself as an artificial intelligence expert and develops leaners and autonomous systems which will have the particularity to learn from the encountered situation and to adapt consequently to it. To reach this objective, we rely on a deep technological innovation that we are looking for through our R&D programme.
DELTA METAL is a French manufacturer of high quality fastening systems. The manufacturing process is integrated from the cutting to the threading by cold rolling, through hot forging, heat treatment and machining, mostly on small and medium productions scale. DELTA METAL is a privileged partner of main contractors in various industries: Nuclear, Railway, Defence, Transport, Hydroelectricity. We are EN 9100 certified since 2015.
In the interest of its own international development and with an unwavering focus on performance, Derichebourg Group's aeronautical subsidiaries are combining their expertise to offer clients a new, single department: Derichebourg aeronautics. For 20 years, Derichebourg Atis aéronautique has been a major aeronautical subcontractor on the international scale. From manufacturers to airline companies, from leasing companies to financial institutions; Derichebourg Atis aéronautique offers extensive know-how throughout the entire life cycle of both commercial and military aircraft (Industrialization, Assembly / Production, Logistics & Supply Chain, After-Sales / Continuous Airworthiness Management). Derichebourg Evolution Formation is a professional training centre that supports not only companies in their training programmes but anyone undertaking a career change or professional reorientation. The centre offers more than 40 tailor-made training courses, of variable length and qualifying, oriented towards professional practice (aeronautics, management, safety and prevention, cleanliness...). Derichebourg Sourcing Aero & Energy is a pioneer in temporary work in Europe, supporting aviation companies and the largest firms in the aerospace industry. For long or short missions, the 20 Derichebourg Sourcing Aero & Energy agencies recruit and send out specialists with expertise in highly technical industrial environments or flexible resources allowing them to deal with variations in workload.
DIAGER INDUSTRIE is a leading, innovative player in cutting tool design and manufacturing. We make standard and custom tools for drilling, milling, reaming and grinding in the engineering industry. In a highly diverse market, DIAGER INDUSTRIE's design and development department is able to guarantee customers the benefit of the know-how of the worldwide specialist in carbide cutting tools. You can rest assured that you have in us an ally who will help you to optimise your performances and costs whatever your machining issues are.
DOMAERO is a Company involved in sheet metal and boilermaking working for aeronautic industry. 27 years of expérience and skill in Titanium, stainless steel, Inconet and obvosly in Aluminium. State-of-the-art production facilities and a recognized business organization.
Manufacturing in small or medium quantities of technical parts of all kinds of materials and especially of nickel alloy, Titanium, stainless steel … Manufacturing of equipment for tightening bolts. Waterjet cutting
SDM DUPUIS MECANIQUE is a specialist in machining (turning, milling, CNC 3-4-5axes) of complex and critical parts in any metallic or composite material and in the fabrication of precision mecahnical assemblies for Aeronautics and Space Industries. Capacity in programming, jigs/tooling design, moulds for composites. Numerous qualifications of assembling processes through our subsidiary Induxial. Capabilites in 3D Printing (ALM) production. EN 9100, ISO 9001 and AS 9100 certifications. Production from bars, plates, sheets, castings, forgings, etc. … Dynamic supply chain management (material procurement, heat and surface treatments, subcontracting, …). Best-in-class industrial performance (OTD, OQD, …) trough Lean mftg, Six Sigma, …. . Located in Northern France at the crossroads of Europ
E-COBOT is a company, specialized in the design and integration of cobotic and artificial intelligence solutions. The E-COBOT team has designed a smart mobile cobot " HUSKY", a cobot to help operators.
ECOFIT & ETRI products offers a wide range ventilation solutions and completes this offer by providing specific Customer solutions developed in partnership either based on existing models or using customer's specifications. The sales and R&D departments are structured around this goal and can be of assistance from the design phase.
Graphite parts and electrodes machining. Machining of dusty marerials by saw, lath, grinding, and milling 3 and 5 axis. EDM supplies. Stainless steel waterproof dividing tables. Clamping systems and high speed spindles for robot and machine tools. Polishing and Deburing supplies, plasma microwelding.
design and manufacture of components and complete powertrains from 5 to 500kW: thermal engine, electric motor, gearbox-transmission, battery, engine control and energy management
Electroimpact is a highly experienced aerospace automation company with an exceptional concentration of engineers. Our wide range of projects include complete automation assembly systems for commercial aircraft wings, riveting machines and tools for wing panel and fuselage assembly, advanced fiber placement machines and robotic assembly systems.
National Group with family capital, SPECIALIST in packaging CONCEPTION and DISTRIBUTION. We have a complete RANGE of STANDARDS SUPPLIES available at www.entourage.fr. Our team of developers identifies and analyses your needs to advise on suitable SPECIFICS SOLUTIONS. A service of EXCELLENCE and PROXIMITY for a PERSONALIZED support and OPTIMIZED solutions. In accordance with the security regulatory obligation, we are certified IO 9001 and ISO 26 000 RSE Maitrise.
ADDITIVE MANUFACTURING SMALL-MEDIUM-LARGE SERIES Specializes in additive manufacturing, prototyping, pre-production and mass production Since 1997 we have been offering a complete range of additive manufacturing and finishing services for your projects. We are skilled in various 3D printing technologies such as deposition, composite CFF and FDM, stereolithography, Carbon technology, PMMA Binder Jetting, polymer powder sintering, Multi-Jet Fusion technology, metal fusion, machining, silicone moulding, RIM moulding, rotational moulding, plastic injection, paint finishing and chrome painting..
ES LASER is a family company specialized in the design of industrial Lasers. The know-how of our Team: the development, the manufacture and the integration of Lasers and customized Laser machines, for every project which need the Laser technology, like metals or plastics welding, engraving, marking, fine cutting or coatings removal. We also offer our Customers all the associated services for their projects: job shop, feasibility tests, process optimization, technical training, after-sales service, etc.
ESI Group is a leading innovator in Virtual Prototyping software and services. Specialist in material physics, ESI has developed a unique proficiency in helping industrial manufacturers replace physical prototypes by virtual prototypes, allowing them to virtually manufacture, assemble, test and pre-certify their future products.
PARTNER OF YOUR PROJETCS Precision machining: turning, miling (3, 4, 5 axis) Aeronautical standard parts Tooling & Equipments : design, production, on-site installation FusiA: 3D metal printing
We offer co-design end complete manufacturing of technical solutions for your equipment with our 32 MOCN (CNC turning – milling – welding).
ROBERT SAS is one of the largest French steel service centre in the flat carbon steel, specialist to supply wide band, slit strip, sheets, and blanks (square, trapezoid, and form).
EURO MOULE is proud to be able to offer its aerospace customers 30 years of expertise, projects and production in the field of thermoplastic injection, resins and composites. The technicality of the developed solutions is as original and diverse as your requests. Our industrial field covers the technologies of laser cutting, marking by photo-engraving, molding and overmolding. Quality is our constant concern, in agreement with your requirements.
Industrial Solutions Designer and Integrator, eXcent group brings an expanded expertise to each of our clients by placing their industrial issues at the heart of our thinking. So we are able to offer concrete and effective answers. Presents on 12 sites in France and 5 abroad (USA, Mexico, Romania, UK, Germany), eXcent Group has 700 employees and a revenue €70 in 2018. Its high level of requirement, its proximity and its team spirit allow eXcent to guide its clients in their industrial projects implementation as much complex as ambitious and covering the entire production chain (studies, design, manufacturing follow-up, integration, maintenance). eXcent works in all sectors: aeronautics, railway, energy, defense, automotive, naval and space. With 28 years of experience, eXcent also invests in the development of its own products to offer ever more innovative solutions.
FAAR is an electronic equipment manufacturer and advanced engineering company, expert in embedded control and power systems. The company develops complex electrical-electronic architectures, complete systems for vehicle control, robotizing and automation, global integration of ADAS and autonomous driving and next-generation connectivity solutions. FAAR supports its customers in the implementation of real-life experiments and serial programs with the management of innovative projects in the field of New Mobility in the automotive, aerospace, defense, transport sectors. Since 2016, FAAR’s expertise has shift to the field of energy transformation and storage, from the design, validation, manufacturing and maintenance of long-life cycle equipment.
Design, development and manufacture of industrial and aeronautical components. Control, repair and overhaul of aeronautical accessories and airborne instruments.
FARADAY aerospace designs Certified Electric Propulsion Systems (EPS) for aircraffat. ARADAY is startup which co-founders gather more than 40 years of expertise in Electric Propulsion. We started working those techniques at Airbus, Boeing, Safran, Thales, Zodiac et Valeo (automotive industry is also inspiring our innovation). Our EPS family includes installations from 50 to 1.000 kW. We are an integrator gathering teh best technology bricks in our EPS. Our EPS are modular, scalable and flexible. They will soon be certified according the next regulation wich are being written by intrenational groups where we are active members (ASTM/SAE/GAMA)
ELECTRONIC MANUFACTURING SERVICES FOR AVIONICS & DEFENCE PARTS INCLUDING PARTS PURCHASING, MANUFACTURING, PROTOTYPES, IN-CIRCUIT AND FONCTIONAL TEST DFM & DFT, COATING, BURN-IN, RX INSPECTION, BGA LASER REPAIR, RETROFIT, REWORK, CAO ISO9001, ISO13485 & EN9100 CERTIFIED, QUALIFIED IPCA600, IPCA610 & IPCA620
Federal-Mogul Systems Protection designs a full line of sleeving and protective wraps based on textile expertise. Its sleeving solutions protect against abrasion, electrical arcs, heat, fire and electromagnetic interferences. The company is active on the automotive, industrial, railway and aerospace markets.
Festo is a global supplier of pneumatic and electrical automation systems. Festo has developed the expertise for optimizing production tools in working very closely with its customers from some 200 manufacturing sectors of the industry. The result is an extensive offer of automation components, complete Plug & Work systems and trainings. Our goal: your productivity.
Production of technical mechanical parts, all types of materials for advanced sectors: precision turning and CNC turning and milling. Design, co-development, industrialization, assemblies.
FILETAGES INDUSTRIES is specialized in grinding thread, the tool manufacturing rolling cold "THREAD ROLL" and the use of these past and ensuring mastery of thread in all its forms.
Fingermind develops and markets the MRO platform enables maintenance technicians to access all the data necessary (textual procedures, search functions, 2D drawings, parts catalog, 3D, ...) to carry out aircraft maintenance operations on the field via touchpads. The system can handle airplanes, helicopters of all brands and types. The technician will have mobile access to all aircrafts in his fleet using the same system for all devices. The product consists of a basic module (access to the documentation) and several optional modules (Electronic JobCard, ...). MRO Mobile is an off-the-shelf product that has already been validated on major commercial aircrafts.
Fischer Connectors has been designing, manufacturing and distributing high-performance connectors and cable assembly solutions for more than 60 years. Known for their reliability, precision and resistance to demanding and harsh environments, Fischer Connectors’ ultra-rugged products are commonly used in fields requiring faultless quality, such as transportation, medical equipment, industrial instrumentation, measuring and testing devices, transportation and military forces worldwide.
FLEURY GF, manufacture in mechanics and precision tools. Integrated into Pegas Group with its subsidiaries ACMO and Pegastech, Fleury produces finished products for the aerospace, medical and military sectors. It intervenes in production of finished parts or subassemblies in Europe or abroad. From the design office (APS, APD, Programming ....) Through our machine shops (drilling, lapping, machining) to assembly see the wiring. Our teams accompany you in fulfilling your needs
FACT is a french start-up located near Toulouse center of Aerospace and Space Industry excellence in France. Our compagny design, qualify, and manufacture electro-hydraulic and electro-pneumatic units able to meter all kind of liquid and gaz.The architecture of our products is simplified in comparison of our competitors providing the ability to reduce cost, to increase stability of performances and improve reliability. The product is able to work in a wide range of pressures, flows and temperatures (electronic free), including functionning at low pressure. Our company is composed of 8 engineers, in a factory of 180m2 that include an assembly shop under laminar hoods, test benches with fuel, oil and bleed air at various kind of temperatures.
Fluorotechnique is spezialised in fluoropolymers coatings and several special processes for technical applications in the aerospace military and nuclear industry - 2 sites of production: 93100 Montreuil & 33160 St Médard en Jalles - FATAA project: replac
Foundry of Precision, for aluminum technical sand and die casting. Specialist recognized on markets : aeronautic, defense, railroad, prototype for automotive, etc.... Since 1961 Member of a leading group on his market.
With a solid industrial experience in the metal industry, FORTAL has become a flagship for the design and manufacture of secure access systems at height in aluminum. For the aeronautics, FORTAL proposes solutions adapted to the specific access requirements for the manufacture and maintenance for all types of aircrafts. Mainly designed for technical and maintenance services, FORTAL's equipments fall into the following categories :maintenance docks, platforms, runway stapladders, door access, ...
FRANCE BREVETS is dedicated to monetization and protecting French technological innovations Our mission is to support companies/businesses in the monetization of their innovations by structuring their intellectual property and defending it world wide. Created in 2011, with an initial commitment of € 100 million (PIA1) and an additional commitment of € 100 million (PIA2) flowed in 2016, FB is owned by the French State and the Caisse des Depots. Our team of highly qualified experts has a strong international presence, particularly in Canada, China, South Korea and Japan.
We specialize in the electrolytic and chemical surface treatment of aluminum alloys and in liquid painting for the aerospace and defense industries. We can also offer our customers additional services such as penetrant testing or marking.
Global Sub Contracting of mechanical parts and assemblies for the aeronautical industry. Invest and innovate in People, Organization, Technology, and Robotization to offer best in class Industrial Performance and worldclass competitiveness.
3D METAL PRINTING Design Office, Re-Machining, Finishing Quick production Weight savings Production tools: EOSINT M280 and M290 FusiA Impression 3D Métal Inc : Montréal, CANADA
676/5000 G2 MECA CONCEPT Company of study and realization of tools and industrial means. Study and manufacture on the same site of Romorantin (41): * 1 design office, equipped with 4 CAD stations "CREO 2" Business managers have extensive experience in the fields of industrialization of tools, ergonomic workstations, production lines and special machines. * 1 General Mechanics Workshop equipped with CNC machines (5-axis ULC + CN Towers) 3D plastic printing. * 1 Metalwork workshop. * 1 Assembly workshop * 1 team of installers on customer site. It is also : From machining outsourcing and subcontracting of boilermaking
Gaci Rugged Systems designs and manufactures onboard systems and FPGA boards for harsh environmental conditions and long term programs. Our computers are available in ATR, ARINC600 or rackmounted form factor and DO254 certifiable.
For now more than 30 years, Galion is specialized in chemical processing for aerospace parts. Qualified partner by the largest groups in this sector, we put our energy to satisfy the actual needs of our clients and go further their future expectations.
Galleon Embedded Computing is an innovative leader in development of high-performance, high-quality storage solutions and small rugged data recorder systems, servers and NAS devices. Galleon’s offerings span from commercial grade products for benign environments to ruggedized conduction cooled products for deployed systems in severe environments. Galleon Embedded Computing is a privately owned company headquartered in Oslo, Norway, with sales and system integration facilities in Katy, TX (US), London (UK) and Munich (Germany). Galleon is rapidly growing and was one of the 2016 Deloitte Technology Fast 500 EMEA companies.
Company of 44 people specialized in high precision micromechanics.
Consortium of defense and aeronautic subcontracting companies.
As inventor of the 3DMP® technology, GEFERTEC has become innovation leader in the field of additive manufacturing of metallic parts, especially those of major volume (up to 3 m3) and mass, respectively. Founded 2015 in Berlin, the company enjoys a considerable installed base at renowned international customers already today. 3DMP® integrates the mature arc welding technology and a user-friendly CAM software together with the arc printing machine series that uses raw material in wire form.
GETELEC is a manufacturer of EMI shielding gasket, thermal management and environmental sealing. Our range of product is composed of Conductive silicone gaskets / Conductive anti-corrosive gaskets / Shielding metal gasketing / Thermally conductive gap filler / Aircraft grade silicone gaskets.
Designer and manufacturer of hand tools since 1977, we have developed appropriate responses to the specific needs of professionals in assembly, MRO repair units or mechanical handling. Our teams are customer-oriented, with an approach that makes our specificity and strength: • Curiosity and willingness to fully understand the specific needs of the customer and provide a personalized solution, • A spirit of creativity and innovation which is based on our know-how for multiple technologies, • The inflexible will to satisfy the customer and the job well done. At Gillet, we are convinced that the tool can be an extension of the human hand. For each operation, we can create tools that allow us to gain quality of work, gain in ergonomics and productivity.
Located Cugnaux (31) , established in 1981, resumed in October 2012 . Main business is aero , 85% CA. Certification: ISO9001 : 2008 & EN9100 : 2009 Approval prime contractor Activities: surface treatment of aluminum and steel with or without application of liquid paint . Main treatments are : Alodine , OAC , OAD , OAS , galvanizing , burnishing , phosphating , passivation , Micro Arc Oxidation CERATRONIC® , non-destructive testing . Treated materials : 80% aluminum - 20% steel.
Starting in 1999, Globalsys was the first in the world to • Establish a wireless vocal communication system • Full Duplex between the aircraft and the ground crew Based in Paris, in France, Globalsys is specialized in wireless audio communication systems with operations in aeronautics, military sector, railway sector and other industrial applications. GLOBALSYS develops highly innovative and effective solutions in the areas of : Wireless Communication Systems Cordless Audio Systems Embedded Technology GLOBALSYS is acknowledged as an expert for Cordless Audio applications, being able to propose a wide spectrum of wireless technologies adapted for Voice communications in particular. We adapt our solutions to YOUR needs! Welcome to GLOBALSYS
4 companies but 1 single site, right in the middle of France (Indre) and with a shared expertise on surface treatment of metal parts so as to prevent corrosion. galvanizing, phosphate v-conversion coating, chromate-conversion coating, Surtec 650,OAS,Magni 565, Zintek and Techseal, Nickel Zinc,geomet, cataphorese, zinc coating
GORGY TIMING is a French family business founded in 1974 by Maurice Gorgy. We design, manufacture and sell time distribution and synchronization solutions. Worldwide recognized industry leader, Gorgy Timing is well known for its know-how and skills in the distribution of a secured time information and visual communication, whatever the distance. Our time synchronization systems are used in civil and military air transport (Rafale, A380, Eurocopter): accurate dating of timing data in control towers, airports and on board aircraft and helicopters.
Specialist in subcontracting for aeronautics, GRESSET ET ASSOCIES employs 49 people. Strong skills have been developed in the machining of components for hydraulic systems (eg manifold). A workshop produces bronze bearings and precision washers (MRO aero). GRESSET ET ASSOCIES offers turning and milling of a wide variety of parts. The investment in a 5-axis machining center (34 pallets, 320 tools) increased the company's capacity.
Groupe Blondel's organization is based into 3 Business Units : Transport - Logistics - Aerospace. Our activities in aerospace : Transport = oversized load (1-2-3) - multimodal international freight forwarder- transport scheme optimization - customs broker (AEO certified) Logistics = integrated logistics in & ex situ - retail logistics - heavy handling- production schedule _ Work Package Center
French independant group (±90 people) specialized in the machining of complex parts and assemblies for the Space and Air industries . Main modern manufacturing capacities: - ±45 CNC machines: 5-axis High Speed center, turnings mutli-axis, turning/milling center, EDM - Means of inspection in line: 12 Machine 3D (probing, scanning, optical) -IT workstations: CAM, CAD, 3D simulation and ERP - Finishing, cleaning US, marking, assembly Processed Materials: Titanium alloys, stainless steel, aluminum alloys and hardened steels
Engine tools and ground maintenance tools. Prototypes, devellopement, models. Precision sheet metal working, laser cutting, EDM, welding. Member of a group of companies offering a complete service: casting, sheet metal, machining, assembly.
Specialized in both, heat and surface treatments, HACER is one of the first national actors in terms of global offer. Division HTS: chemical & electrochemical platings, finishing operations. Division AD PLATING: deposit of precious & semi-precious metals. Division HTT: Heat treatments : under atmosphere (load, carpet, vertical furnaces), vacuum or by induction (on average or high frequency). Certification EN9100 and various aeronautical qualifications.
HALGAND, a major partner in the AEROSPACE Industry
- Build to Print – Build to Specs.
- A machine-park at the cutting edge of technology.
- CNC Milling, turning, sheet metal orking, assembly, surface treatment
Since 1952, HEBECO PLASTIC, specialized in plastic injection, puts all its technical know-how and all its energy at the disposal of its customers, to manufacture with great care their injected plastic parts and their subassemblies. Our strength lies mainly in supporting our customers (from the design to the completion of their projects), the diversity of our business sectors and all our technical capabilities (mono or bi-material plastic injection, overmolding, US welding, assembly, ...). Our 13 injection presses (from 50T to 500T) guarantee quality, productivity and delivery time. The flexibility of our workshop allows us to process all series sizes and transform various materials (technical or commodities) with always, as a primary objective, the respect of quality and your satisfaction.
HEURTEAUX (a HÜBNER Group Company) creates and produces elastomeric parts (silicone, polyurethane, nitrile,...). HEURTEAUX is a subsidiary of the HÜBNER group, which is AIRBUS approved supplier. Our silicone vertical extrusion line allows us to produce unachievable profiles in traditional extrusion.
Vero Software is part of the Production Software business of Hexagon Manufacturing Intelligence. As a leading metrology and manufacturing solution specialist, our expertise in sensing, thinking and acting – the collection, analysis and active use of measurement data – gives our customers the confidence to increase production speed and accelerate productivity while enhancing product quality. Through its Production Software Business, Hexagon’s Manufacturing Intelligence division develops and distributes software for the tooling, production engineering, sheet metal, metal fabrication, stone and woodworking industries. The world-renowned brands include WORKNC, VISI, EDEGCAM, WORKXPLORE as well as WORKPLAN, an MES and job management platform for custom manufacturers. Learn more at hexagon.com and follow us @HexagonAB.
HEYRAUD is a family business of precision mechanics created in 1946. We have been certified EN9100 since December 2016 and ISO9001 since 1997. The dynamism of its team of 35 employees, associated with its fleet of 30 recent and powerful CNC machines, ensures a complete quality offer.
HODé is specialized in printing, shaping, cutting and complexing materials for surface treatment. STENCILS for logos, airline names and registration numbers, WINDOW MASKS (3 layers. At the beginning of each cycle (sanding, painting, finishing) you take off one layer), MYLARS (to position the stencils), TECHNICAL MARKING (Manufacturer’s plates, Front panels, Identification tags, Brand labels INTERIOR LABELS AND PLACARDS (lexan, solid foil or mylar)
STUDIES and REALIZATIONS CAPITAL GOODS INDUSTRIALIST MECHANICS MANUFACTURER / MECHANIC WELD SERVICES(PERFORMANCES) LOGISTICS PARTNERS and OPERATIONS OF INDUSTRIAL TRANSFER PRODUCTS OF TECHNICAL PACKAGINGS: REGULATED, INDUSTRIALISTS, WRAPP, FLIGHT ACCOMMODATES, CARDBOARDS(BOXES), WOOD, PLASTIC(PLASTIC ART) and OTHERS. CONTAINERS COMPOSITES and BOXES(CASH REGISTERS) STRATIFIED MECHANICS and MANUFACTURING of PRECISION
We connect Human & Technologies : Smart, Simple, Safe® Through our expert human-centered approaches, Human Design Group helps its clients create the conditions for the success of their transformation and innovation processes through high-value usage solutions. Human Design Group puts Humans at the heart of aeronautical performance : Smart factory / MRO / Training / Cockpit / Cabine / ATM Human Design Group - Key point: + Pioneer and French leader +100 human science consultants: digital ergonomics, UX design, human factor, neuro sciences +40 years of experience +30 large customer groups Human Design Group is the missing link of your competitiveness !
Machine Tools manufacturer
HYDRO LEDUC is a specialist in the design and manufacture of high pressure and performance hydraulic components: - fixed and variable displacement piston pumps - fixed and variable displacement piston motors - hydropneumatic accumulators - microhydraulics - special cylinders.
For more than 50 years HYDRO has been supporting the aviation industry with innovative solutions for the maintenance, repair and assembly of civil and military aircraft. Our whole life cycle solutions are designed to perfectly fit our customers’ needs. HYDROs business areas include: Ground Support Equipment, Airframe and Engine Tooling, Engine Transportation, Engineered Solutions, as well as Service. HYDRO – In safe hands.
REPAIR CENTER for mechanical + HSC SPINDLES / ALL BRANDS - Manufacture for tailor-made HSC spindles (IBAG)/A team of very specialized technicians - 20 years experience on dozens of brands - a workshop exclusively dedicated to HSC-spindles maintenance - a state-of-the-art Equipment : honing bed, grinder for shaft or mounted spindle, balancing machines, a metrology air-conditioned room, vibrations measurement and analysis material - a detailed dismantling and analysis report with pictures
ICM industrie, Specialist in the transformation of high performance plastic materials, composite and non-ferrous for aeronautics. OUR QUALITY COMMITMENT - ISO 9001, EN 9100 certification - traceability of material and finished parts - ISP EN 9102 and self-checking statements - 3D control in a controlled atmosphere - Excellence Programs: PACTE PME, SPACE 1, SPACE 2, Pépites OUR SERVICE SPIRIT - mechanical engineering consultant - High performance materials (PEEK, PAI, PEI, PSU, PTFE ...) and composites (FR5, FR4, GPO3, G11, PI ...) precision machining on 3 to 7 robotic axes -assembly, finishing, painting, silkscreen -Supply optimized chain: Lean approach from receiving material to delivery of finished products OUR PROXIMITY 6 production sites in France and in low-cost areas
ID Alloys stocks and distributes nickel and cobalt alloys, mainly sheets & bars, such as pure nickel, 400 600, 625, 718, HX, 188, Waspaloy, ... Furthermore, ID Alloys offers technical and logistical solutions, in order to satisfy its customers specific requirements. ID Alloys is certified to ISO 9001 & EN 9120.
Precision machining, CNC Lathes, CNC milling, CNC screw cutting
IMS (Integration: from Material to Systems) laboratory was funded in 2007, by merging three research units: IXL, PIOM and LAPS. IMS brings together fundamental research, engineering and technology, emphasizing an integrative systems approach in the disciplines of Information Technologies. IMS is a joint research unit for the French National Center for Scientic Research (CNRS), University of Bordeaux and Bordeaux INP. In CNRS, IMS is affiliated to the Institute for Engineering and Systems Sciences (INSIS) and to the Institute for Information Sciences and Technologies (INS2I)
Inoprod is an engineering holding company, which originated from Inoprod Services, a company founded in 2011.The vocation of the Group is to provide our customers with the technical and strategic indicators they need to master their product and industrial process performances. We safeguard your investment and organisation choices with a global technological offer focusing on simulation and risk management. We guarantee the reliability of our work and our results. We offer you the opportunity to be fully autonomous in these skills through training and the sale of software licences.
For more than 60 years we have been designing and producing flexible electrical connections based on braid or strapping. The unparalleled mastery of braiding and processing of copper strapping allows us to offer a wide range of innovative and cost-effective technical solutions for many industries such as: -The electrical appliance -Transportation and distribution of energy -Aeronautics and space -The railway -Automotive -Renewable energies
Internest is a French startup, specialized in guiding and positioning technology. We developed a guiding system based on ultrasounds for rotary aircraft. Our solution secures: take-off and landing, the most complex maneuvers for rotary wings. Internest contributes to solve some of the issues related to autonomous flights and the new challenges of urban air mobility.
Interplex Soprec manufactures precision parts and mechanical subassembly. Its expertise is focused on precision stamping, deep drawing and over-molding. Services: Co-design, Short lead time prototypes, production low & high volumes, assembly. Products: Electrical devices, precision mechanical subassemblies, Deep drawn components. Interplex group has 32 production facilities in 14 countries with 13000 employees.
IRT JULES VERNE is the French industrial research institute dedicated to advanced manufacturing technologies. IRT Jules Verne works with the best industrial and academic resources in manufacturing to bring innovative solutions to the factory floor in the short-medium term.
ISP System develops and manufactures linear and rotary embedded actuators for the aeronautics, space and defense sectors. Their characteristics can be adapted to the application and to the severe conditions (extreme temperatures, vacuum, electromagnetic radiation, vibrations, ...). The control electronics as well as the control software can also be offered by ISP System.
Design and production of black and coloured compounds ready for use. Rubber compounds: classics, specifics, silicons (from few kilograms to few tens of tons). 30 aeronautics approvals
Nowadays JEDO TECHNOLOGIES propose the implementation of complete mechanical subassemblies. Our multidisciplinary teams are able to meet the technical and logistical needs of all sectors of industrial activity. Today we allow the optimization of high-value materials (Titanium, Inconel, Tantalum ) for optimized blanks cuts. Our machines cut daily sensitive components for the aerospace industry and a full range of foams for tools boxes through key benefits hands. ISO9001 and EN9100 certified , qualified Bombardier , Airbus and Dassault. With 27 years of experience in high value sectors, JEDO will your next reliable partner.
JET CUT is the aerospace expert in waterjet cutting in Europe. Our agility and innovation capacity has allowed us to build strong partnership with our clients. We manufacture parts of : Aerostructure Cabin interior Engine We do 2D and 3D waterjet cutting for metallic materials (Titanium, Inconel, Alu, Stainless steel, steels and alloys) and composites (thermoset, theremoplastic, PEEK) up to 300 mm thickness. Benefits we offer to our clients: Materials optimisation and consumption reduction Cost reduction of milling and trimming Deported stock management with takt time delivery Our 24/7 manufacturing solutions are able to cut parts from a few centimeters in composites up to 12 meters long and more than 10 tons weight. Manufacturing solutions: Waterjet cutting 2D and 3D with the largest capacity in Europe: plates, 3D parts, forging parts, tubes Waterjet combined with conventional milling & ultrasonic for soft materials (Composites, hot forming and SPF parts, Aluminium) Automatic storage systems We ensure the industrialisation of our parts including the design and manufacturing of our tooling. We have the last generation of inspection solutions and the all certifications: ISO 9001 EN 9100 Airbus Technical and supply (AIPS, ADET) Dassault Technical and supply
DIE-CUTTING AND TRANSFORMATION OF FLEXIBLE SEMI-RIGID AND CELL MATERIALS. PLASTIC DIVIDER WEDGES. WEDGING FOAMS. MACHINES ITEMS, ADHESIVE BONDING, SLICING WATER JET CUTTING. ALL PARTS ACCORDING TO YOUR DRAWINGS AND SPECIFICATIONS
Production and installation of automated machines for 3 and 5-axis high power and high speed milling
JFG is specialised in the manufacturing of gaskets and metallic parts by Cutting and Stamping. Small to large batches. Agreements ISO 9001+14001+TS16949 Management of subcontracting (surface treatment,heat treatment ...) Materials: Steel, stainless steel, aluminum, copper, brass... Cutting : thickness from 0.05 until 8mm. Stamping : Until 5mm of thickness Diameter : until 600mm Design, Manufacturing and maintenance of press toolings by AMP ECTM
Founded in 1974, JONE PRECISION is a family business run by Eric and Franck JOGGERST. It has always been present on the market of cutting tools and equipment of M.O With a solid know-how, a well-established sales organization and a real understanding of the needs of our customers, we work in the fields of turnkey machining solutions in close cooperation with our customers . Our business: bring you optimization and greater value
Detail, precision of detail, the permanent chase for new tools to fit your new performances. From the table to the spindle of your machine, we provide solutions to your machining. Since 40 years, our job is to seek the optimization for you. Come in the Jone Precision dimension Sharp Tools, Sharp ideas ! Since 2012, JONE PRECISION & ENGINEERING MAROC AKA JONE MAROC. A subsidiary that brings the experience and skill to aeronautic industry nearby CASABLANCA. Since 2018, the office in BUCAREST mainly cover the automotive industry in the eastern Europe area. JONE PRECISION with you to go further in your projects and success, in France and abroad !
Sub contracting in precision machining and manufacturing of aeronautical sub-assemblies with quality assurance EN9100.
Consulting firm specialized in project management and quality. We are committed to our key account and ETI clients in order to support their new projects in a spirit of innovation, control and knowledge sharing.
Kattan Aeroservices is specialized to supply all specific tools for the aeronautical industry Visit our website www.kattan.fr to display our range of products dedicated for the aeronautical industry to improve your efficiency.
Kloeckner Metals KMS Aero is Kloeckner Metals France’s branch specialized in distribution of Aluminum, Titanium, Nickel-based products, Bronze and Stainless Steel for Aeronautics, Space and Defense industry. Kloeckner Metals France is a subsidiary of the German corporation Klöckner & Co. Certified ISO9001/2015 and EN9120/2018 by BSI, their performance builds on the deep expertise of their sales team and on full traceability for each product. In order to optimally fulfill their customer needs, Kloeckner Metals KMS Aero relies on dedicated logistics with performing equipments for processing services, as well as digital services and solutions. Our Kloeckner Metals KMS Aero team are looking forward to meeting you on their stand at next Salon du Bourget! »
KOLLER The company is a modeling company "HIGH TECH" specializing in milling of complex shapes, equipped with CNC milling machines 5 axis linear motor and large capacity. Our services: - Design, fabrication and machining different materials - Achievements style models for transport - Masters Achievements and models for water sports - Special Composite Tooling Production, dredging and clipping.
LMT is more than 70 years of experience in tecnical coatings ( abradables, carbides, ceramics) for all industry sectors. We ensure the coatings development and the serial production in partnership with major player in aerospace industry.
La Précision is a subcontracting company specialised in the manufacturing of high precision micromechanical parts. Our aim is to provide complete solutions to the most demanding sectors by meeting their specifications and quality requirements. We produce micromechanical components by machining (turning, high speed milling) or laser melting. We manage internally most of the finishing processes used to make parts: grinding, electrochemistry, deburring, vibratory finishing, laser marking, specific packaging. We are certified EN 9100 version 2016.
Lachant Spring is an international producer of all the kinds of springs. For the industry we develop and manufacture wire and flat springs, mounting brackets and connection cut metal parts designed for sub-assemblies manufacturing, from small to large volumes.Our main customers come from the different sectors, such as automotive, aeronautics, construction, electrical industry…
As specialists in the design and production of electronic assemblies and sub-assemblies, LACROIX ELECTRONICS has been bringing the projects of its customers to life for over 40 years. Thanks to its design office and additional production sites, the company is evolving in an innovative ecosystem to develop a smarter and more responsible industry.
The aeronautics sector’s major purchasers have borne witness to their confidence in us for over 60 years now, recognising our EXPERIENCE, KNOW-HOW and COMPETENCES on a daily basis. LAMRE manufactures products for use in the air and on land: • Electromechanical measuring instruments (galvanometers) • Aeronautical harnesses • Circuit boards • Special tools and test bench CERTIFICATIONS • EN9100:2009/S1 (No.AERO/2007/30522) by AFAQ AFNOR • ISO 9001:2008 (No.15670) by AFAQ AFNOR • OTAN F2473
LASELEC designs and manufactures high-quality machines used in demanding industrial sectors: high performance laser wire markers, laser wire stripping systems, interactive harness assembly boards, harness overbraiders.
LDM has been designing and manufacturing all types of mechanical parts for almost 50 years, with a know-how and quality that have made it one of the leading players in high-precision mechanics. Positioned as a specialist in the production of critical or vital parts with tolerances of a few microns. We meet our customers' demands for quality and precision by machining both the most common and the most exotic materials (titanium, Stainless steel, Aluminium, Invar, Kovar, Copper, tungsten, bronze, brass, composites, etc.), and we can manufacture your products from end to end, from th sourcing of materials and castings, to the delivery of the treated parts.
Forerunner since 1978 in turnkey machining solutions for complex processes, LE CRENEAU INDUSTRIEL proposes an innovative and robust offer of processes carried by 5-axis machines or robots, on 4 continents.
Since 1946, LEJEUNE SAS has been manufacturing and marketing conductive braids and protective sleeves made of thermoplastic polymers for shielding and protection of cables and pipes. Perfect know-how that continues to improve its technical and technological performance for ever more innovation. We also carry out over-braiding for civil and military aircraft, as well as custom winding for overbraiding machines.
INTEGRATED SOLUTIONS AND PROVEN PROCESSES L’ELECTROLYSE, an industrial services company founded in 1900 working for 500 customers, implements the biggest aeronautic range of special processes to: - Fight and prevent corrosion and wear - Equip all metal o
As an aerospace service provider for more than 30 years, LEM continues to stand out thanks to the skills of its teams, for its Customers. It focuses on the quality, responsiveness and competitiveness of its services. Its organization is certified ISO 9001 / EN 9100, accredited Nadcap (NDT). All of these strengths make LEM a key partner in the aerospace supply chain.
We started out in 1760 as a marine classification society. Today, we’re one of the world’s leading providers of professional services for engineering and technology - improving safety and increasing the performance of critical infrastructures for clients in over 75 countries worldwide. The profits we generate fund the Lloyd’s Register Foundation, a charity which supports science and engineering-related research, education and public engagement around everything we do. All of this helps us stand by the purpose that drives us every single day: Working together for a safer world. In a world of increasing complexity - overloaded with data and opinion - we know that our clients need more than technology to succeed. They need an experienced hand. A partner to listen, cut through the noise and focus on what really matters to them and their customers. Our engineers and technical experts are dedicated to assurance. That means a commitment to embracing new technology, and a deep rooted desire to drive better performance. So we consider our customers’ needs with diligence and empathy, then use our expertise and over 250 years’ experience to deliver the smart solution for everyone. After all, there are some things technology can’t replace.
LMBA is based in Lyon, Annecy and Montauban. Leader in its sector, with over 25 years of experience, LMBA involved in the workshops for manufacturing of the engineering sector (machining, machine tools, cutting tools, tooling). LMBA aims to help reduce production costs by digitizing the manufacturing data. For this LMBA designs, develops and markets software GEDIX. GEDIX operates in the areas of • DNC, • Manufacturing Records Management (part, phase, machining programs, documents, list tools, etc ..)
LUBODRY PRODUCTIONS is the European leader in ceramics and technical powders impingement processes. LUBODRY's unique technology provides for the coating of any mechanical parts at ambiant temperature and with no alteration of the Ra nor the original dimensions of treated parts. LUBODRY PRODUCTIONS has always been working with Graphite, MoS2 and WS2 properties, but is now equipped with a novel R&D equipment wich allows to conduct tests with virtually any type of technical powders. All dimensions and geometries are compatible with LUBODRY processes. We are involved in high performance scope of works in terms of friction and adherence reduction, electrical contact or surface finishing.
L’UNION DES FORGERONS is specialized in the supply of open-die forgings and rolled rings in a variety of steel and alloys grades on exceptionally short lead times.
MAFAC FRANCE propose a large panel of cleaning and sandblasting machines. We also realise the start up, training and service from our machines. Cleaning as well with spraying, floating and ultrasonic technologie, drying with hot air and vakuum.
Specialist in the production of very high tech mechanical components or complete mechanisms, MAGAND is the key partner of major famous companies in the Aircraf, Aerospace and defence industries. Our specialities are: -Machining of very High Precision Mechanical components and complete mechanisms -Project management and turnkey solutions -Assembling and integration -Metrology Magand is ISO9001 and AS/EN9100 certified. Magand is well experienced in the following processing skills and techniques: 5 axis machining CNC turning techniques Wire and die sinking EDM ID and OD cylindrical grinding Grinding of shapes, of formed sections, of sphericities and hinge spheres Flat profile grinding Coordinate controlled grinding, jig grinding Assembling CMM Measuring
MARLIER SA is a Non Destructive Testing company certified ISO 9001, EN 9100, PART 145 and NADCAP. We are authorized by AIRBUS and work directly for Dassault and Safran Defense. More 200 costumers trust us by sending us their parts. We also move in your places or on your planes, in France or abroad from our sites in Auvergne, in “Ariège” or in Casablanca.
MB&A has 35 years of expertise in aircraft interior design. Its main activities cover maintenance to place plastic and rug carpets for all aircraft types. It's other focus is the manufacture (part21G) of seat covers, curtains and repairing (Part145) cargo nets for Airbus, Boeing and ATR aircraft.
MB&A has 35 years of expertise in aircraft interior design. Its main activities cover maintenance to place plastic and rug carpets for all aircraft types. It's other focus is the manufacture (part21G) of seat covers, curtains and repairing (Part145) cargo nets for Airbus, Boeing and ATR aircraft.
MC2 Technologies, a French SME, develops innovative equipment for the protection of sensitive sites and infrastructures. Its main products are MM-Imager and UAVs Scram-blers. MM-Imager is a passive millimeter wave imager for the detection of hidden objects carried by people and offers unique performances with real-time operation, high detection level, wide field of view and good resolution while being totally harmless. This device is perfectly adapted for the security of train-stations, metros, airport halls, etc. SACOP is a security airlock transportable corridor composed by one or two MM-Imager for scanning moving persons in real time. Perfectly accommodate for high throughput in private or public areas avoiding queues. In front of the increasing threat of drones, MC2 Technologies develops UAVs Jammers - for drones’ neutralization- available in mobile and fixed versions. The proposed solutions jam all communications between a pilot and its drone. Useful against 98% of commercial drones and effective against hopping communication protocols, main error correction code used in telecommunication, UAVs and IEDs. Systems are completely harmless to the user and are efficient up to several kilometers. Jamming solutions can offer a directional protection with higher distances or a bubble of protection with an omnidirectional jamming.
Since almost 30 years, MDP - maxon motor France develops and produces complete mechatronics systems according to aeronautics requirements. From the fly-by-wire flight control to the air-conditioning systems, MDP - Maxon motor France partners its customers throughout their project with high level of quality assurance thanks to its certifications (ISO 9001 / EN9100) in its developments for aeronautics, spatial, and defense industries.
MECABESS is a precision mechanics firm located in Bourges, specialized in the machining of technical products (small batches to medium-scale production). It has two aeronautical production accreditations: EN9100 and PART21G. MECABESS works primarily alongside industrial key accounts and SMEs. In a «partner» mindset, MECABESS is proud to forge lasting trustworthy relationships with its customers.
Since 1983, Mecaflash has played a leading role in the precision mechanics area. Mecaflash has developed strong quality procedures throughout its production lines and commercial processes based on ISO 9001:2008 and space and aerospace referential EN 9100:2009. Our business activity is: Aeronautics, aerospace, defence , armament, nuclear, rail, maritime, automotive, food processing, transmission, semiconductor, maintenance services and many others national and international industries.
Since 1994, MECANO ID has been supporting its customers of the Space, Aeronautics and Nuclear sectors in the developement of predominantly mechanical and thermal systems, subjected to harsh environments and requiring effective and robust project management.
MECA-PRECIS puts at the disposal of its clients its know-how and experience in high-precision mechanical engineering: • Machining of unit parts in small and medium series • Traditional methods • Research department • Assembly of sub-assemblies and units • Management of complete manufacturing projects for specific machines. • A team of professionals open to your suggestions • Adapted and air conditioned premises • Leading-edge machine-tool equipment • High-performance IT Systems
Since 40 Years, the family-owned MECASEM group (115 employees) has been based on a strong dynamic of expansion, a sharp technical know-how and a quality management system rooted in its corporate culture to establish as a leading industrial testing and measuring laboratory. The group gives quality and reliability the highest priority in the through execution of all its business activities.
High precision mechanical parts in small and medium production. Specialized in high precision mechanic for engines, transmissions and flight controls through the machining and repair of complex parts part of active systems. Specialized in the manufacturing of composite for rotary wings and structures in civil and military aeronautic market. Additive manufacturing: fast prototyping, production of test parts on SLM machine and repairs solutions through partnership with CETIM.
Meshroom Studio is a software published by MeshroomVR. Its mission: to democratize the use of real-time rendering and virtual reality (VR) by industrial designers, product designers and marketing teams who must visualize and present their 3D projects in a realistic way. Beyond the technical innovation allowing an exceptional realism in its renderings and an unprecedented speed, MeshroomVR represents a true revolution of usage. The simplicity and intuitiveness of its interface makes it easy for everyone to create quality renderings and virtual reality navigation around a 3D file.
Métal-Chrome is a SME founded in 1993 by Bruno Reyneau, specialized in 6 main activities such as machining, surface treatment, shot peening, non-destructive testing, painting application and assembly for aerostructure and cabin interior parts Our target is to provide a global solution to our customers in order to completely satisfy them Supplier of Tier 1, Métal-Chrome employs more than 220 employees on 6 sites situated in Rochefort (France) With a true know-how, Métal-Chrome is today certified ISO 9001, EN 9100 and ISO 14001 Our Activities: • Machining in 3, 4 and 5 axis on aluminum and hard metals • Surface treatment • Ultrasonic and automatic shot peening • Non-destructive testing • Liquid and powder painting application • Assembly of structural parts and complex sub assembly
MGT is a multinational leading stocker and distributor of landing gear and hydraulic components replacement parts for the commercial, regional and corporate aviation. Additionally, our Aero Distribution business unit partners with manufacturer to market and sale non landing gear parts. Our USA office is strategically located in Pompano Beach, FL, covering the Americas and Asia. Our facility in France allows an essential proximity to European and African customers and suppliers.
More than 50 years as subcontractor expert in custom hermetic interconnections for harsh environment (pressure, intensity, tension, temperature, etc…) Design and production of prototypes, small and medium series, based on customer technical specifications. Small size of pieces (Ø 0,2 mm up to 150 mm) - Glass to Metal seal (including dilver P1 (kovar) and titanium) and high and low temperature brazing (ceramic, sapphire, etc…) - R&D and process development for metal Physical Vapor Deposition (PVD sputtering) - Base and precious metals electroplating (specific 99,99% pure gold for space applications) - Products : feedthroughs, electronic packages, sensors, relay bases, connectors, isolators, igniters bases, medical implants etc… - Hermeticity : Leak rate less than 10-8 mbar.l/s - Electric isolation : Isolation resistance over 10 GΩ - Breakdown voltage : from 500 to 3000 V - Pressure : up to 3000 bars - Operating temperature : from -180°C to +300°C (according to coating)
MICROWELD is the French leader in subcontracting of LASER technologies applied to mechanics and micromechanics through know-how of welding, cutting, marking, engraving, deep etching, ablation and texturing. Specialist in laser technologies for high precision, for a large range of raw material, from prototype to large series, we also perform consulting and technology transfer missions. Very wide spectrum of Laser machines. We also propose TIG, Electrical and E-beam technologies. We involve our teams in customer projects through co-industrialization and co-development approaches. Certification: EN 9100 V2016, ISO 9001 V2015, ISO 13485 V2016, qualified SAFRAN, AIR License 0191 ed.1 and ed.2, AFCIMG authorization.
MIJNO (est. in France in 1919) conceives and manufactures precision gears (up to AGMA 14), ground racks (up to AGMA 12) and standard or custom planetary gearboxes. Our application assistance and manufacturing expertise have earned the trust of machine-tool, military, aeronautic, aerospace and nuclear industries. We utilize the highest performance, newest generation equipment for the production and control of your transmission components.
Manufacturing & trade of standard fasteners as well as specific parts in compliance with quality requirements. (ISO 9001, EN 9100 & EN 9120) Products : - Hardware fasteners, - Raw materials and composite - Chemical ingredients : adhesive, solvent, acid... - Production as per drawings & specifications. Services : - Recommendation, expertise, know-how, Design, development and manufacturing, - Central purchasing, rationalizing, cost killing.
Created by experts, all former French Special Forces operators, MILTON is a major actor in development, research and production of drones dedicated to surveillance and security missions of all Kind. Working with governemental organization (army, law enforcement, civil security) as well as with private security companies, MILTON squires you throughout each step of the most accurate analysis of you need, selection, purchase, as well as the training of the future pilots and operators. Offering the best at the best cost.
Minco SA is the French subsidiary of Minco Products Inc (USA). The company is based in Aston (South France) since 1991. Minco Products designs and manufactures electronic precision components : Thermofoils™ Flexible Heaters Temperature Sensors Instruments
MITIS is, a pioneer and leader in the design and implementation of industrial vibration drilling solutions. Integrated in tool holders or spindles, MITIS technology generates a controlled axial oscillation of the cutting tool that guarantees optimal chip management.
Mitsui Seiki Kogyo was founded on December 1928 producing precision machines domestically in Japan. In 1938 Mitsui Seiki introduces on the domestic market the 1st Jig Boring which was the "MotherMachine of Supreme Precision". The history of Japanese Precision machines is also the History of Mitsui Seiki's Machine Tools. These days Misui Seiki is the best in Class Engineering and Innovation and configurable and customizable for each application. Jig Grinder are part also of our program as well as Precision Thread grinder up to 5m.
Chemical Process, Metal Finishing on Aluminium, Titanium, Stainless Steel, Magnesium, Brass. Certified ISO14001, ISO9001, EN9100 and AQAP2110. Actually, NADCAP N°12125190952 Chemical Processing SURTEC 650. ------------------------------------------------------ Launch of a new production site in early 2020, AEROSURFACE will have automated processing lines dedicated to defense, aeronautics and space. With useful dimensions of 3000 * 800 * H1500 NADCAP certification is expected in 2020.
Etablished in 1948, Monin Mécanique has been supporting its partners in the field of cutting-edge technologie ever since. The compagny has managed to grow both organizationally and technically, while maintaining a high level of innovation. Committed to long-term sustainable existence of our company and to self fullfilment of to all our employees, Monin Mecanique's corporate culture is based on human value, which define ots identity.
MTA is a French company which has been manufacturing high precision gears for over 30 years and for different industries such as aircraft, formula 1, printing, naval, energy or machine tools for example. MTA Industrie offers a full service from the manufacturing of the parts up to the assembly. Its two certifications ISO 9001 and EN 9100 are the customers guarantee for high reliability and good traceability. MTA stands out in the technical quality of its competition: up to quality level DIN 3 for ground teeth, internal and external, with possibilities of modification of profiles and helixes (relief, convex teeth). Its broad range of production technologies enables to make virtually all types of gearings (straight, conical, helical, racks, splines, worm screws, etc.). MTA Industrie can produce gears from modul 0.2 to 15, from single units to medium quantity fabrication.
Mugen is a software editor specialized in human/system interactions and creation of human/machine interfaces for all connected systems. Mugen is selling M-START, a software solution to develop supervision and control-command applications for connected objects, systems and environments. OEMs and integrators from the Industry and Robotics have a powerful software tool to ensure the transition to smart factories.
Since 1987, MULTISTATION delivers worldwide industrial equipments of first quality for different applications like automotive, aerospace, railways, energy, defence, marine, education … but also in a certain number of very diversified niches like the jewellery or complete solution for dental applications…
MV SAS is a company specialized in machining, assembly of precision mechanical parts, active in the sectors of civil and military aeronautics, defense and shooting systems, automotive, medical and energies with national and international customers. Equipped with 5-axis machines, turning centers, two-spindle lathes, 6 and 13-axis machining machines, and machining centers, MV manufactures all types of parts in longitudinal dimensions between millimeter and meter, in dimensions 400 mm * 400 mm cross sections in all types of alloys, for quantities ranging from prototype to large series.
The Nefab Group is a global industrial packaging manufacturer specializing in complete packaging solutions that reduce their customers' total costs while minimizing environmental impact. The Group is a leading provider of packaging solutions within the segments of Telecom, Energy, Industry, Vehicles, Healthcare and Aerospace
industrial Dealer supply, the company NEMOR EUROP OUTIL has for mission to accompany you on your technical issues with great responsiveness.
We are Industrial sub-contractor specialized to the precision machining since 40 years. We make your products, from prototype to series, in a large range of materials (special steel, stainless steel, brass, aluminum, plastic, inconel ...) We offer a complete service to our customers, including, machining, assembly, welding and the necessary treatments for delivery the finished product. Certified ISO 9001 version 2015 and EN 9100 version 2018
NEOPOLIA AEROSPACE bring together 60 members from the Pays de la Loire Region, which pool their expertise in order to respond to the needs of the aeronautics market. Drawing on the synergy of its diverse members, NEOPOLIA AEROSPACE is a provider of comprehensive and lasting solutions for aerostructures, systems and equipments, cabin interiors, Industrial process, MRO
norelem sees itself as part of a culture of dynamic innovation. We are constantly working to extend our range of standardized elements. With the BIG GREEN BOOK, we offer a complete range of standardized elements. norelem is also the specialist in clamping technology with its wide range of products that encompass the field of complete 5-axis machining.
Manufacturer of standardized parts for aeronautical industry from international standards : DIN, EN, LN, NFL, NSA, PAN, TAN,… drawings and customers' specifications - Parts manufactured : Washer, pin, cable assembly, tab washer, bent washer, pin, … - Production of prototype, small and medium serie - Other activities : surface treatment, heat treatment - Nearly 80% of our turnover is made for export
Springs manufacturer wire diameter from 0.1 to 20 mm. flat prings manufacturer thickness from 0.1 to 3 mm. formed wire, Wire diameter 0.1 to 20 mm. Mounting small ensembles supply of all types of springs : compression, tension, torsion, form, flat spring. Unit Piece, prototypes, small and large series. Materials: steel, stainless steel and special standards, Inconel, Nimonic, Monel, exotic nuances. EN9100 certification, ISO9100, ISO14001 management of ISP records, DVI, and approved suppliers for special procedures. Integrated design office to optimize the design of your springs. Control of our manufacturing to guarantee timeliness. BtoB, dedicated portal
Noxant develops, manufactures and markets compact, high performance infrared cameras for industrial control applications and long range surveillance.
The core business of the French company Numalliance is to design and realize productivity solutions for the forming of the wire, tube and flat stock. Numalliance’s machines and automated cells are all made in France. They can be standard or customized and are used in several sectors including automotive, aeronautics, point of purchase, furniture design and agriculture.
OBJECTIF EMBALLAGES develops and manufactures a full range of storage handling and transport Equipment. products : Wooden/polyester technical containers wooden boxes cardboarrd boxes plastic and aluminium leak-proof containers foam insterts and kitting studies and design packaging services
OliKrom develops and produces smart solutions that change color with temperature, light, impact/mechanical stress, solvent, gas, ... Our expertise in intelligence of colors makes it possible to develop ways of detection by using a simple change of color! OliKrom assists industrial of all sectors in their innovation projects from the specifications to the "tailor-made" development et the production of the developed solution.
Osborn Metals is specializing in the high precision manufacture of complex metal profiles and tubes in a wide range of materials from carbon steels to exotic. Through its cold drawing process, Osborn Metals offers profiles and tubes for use in a wide variety of applications ranging. The cold draw process is flexible methods of manufacture capable of producing across the volume range and ideal for development of new products.
Specialist in precision machining for aluminium profiles
Production : protypes, small average series of srew machining precision parts. To answer our customers requirements and satisfaction, we have invested in modern and efficient machines. Capacity of ou machine park : Ø1 to 65 mm on bars Our certication : ISO 9001 - EN 9100- EN13 485 - ISO 14001
Technical and engineering company with R&D research tax agreement since 2012, our 20 collaborators assigned to our clients, have recognised skills in parts and equipments design, quality, control, logistics, industrialization and project management. In addition, our custom-tailored recruitment agency, thanks to its 5 dedicated people, is at your service to find the talents needed for your industrial and commercial development. From Operator to Top Director, we work exclusively "within success".
PEI-Genesis is a worldwide manufacturer and assembling distributor providing engineered connector solutions for the aviation & aerospace, military, transportation and energy industries. PEI partners: Amphenol; Cinch; te Deutsch and polamco, Raychem, Harting, lemo, Itt Cannon.
Specialist of Microswitch and inductive sensing solutions for harsh environments. PETERCEM supply the civil and military aircraft industry with high reliability components. PETERCEM products are installed on critical applications such as landing gears, flight control (spoilers, flap and slat, THSA), thrust reversers, doors opening and locking systems, air conditioning system.
PMD: precision machining, turning, milling, grinding, assembling, proof test. Surface treatment, heat treatment and non-destructive control with approved partners. Vallon Outils Coupants: specials milling tools manufacturer. ERM Vallon: designer and manufacturer of test bench
PMG Aerospace is a key actor in surface treatment by wet and dry processing for industry.
High qualified staff, high technology treatment capacities, meeting the most stringent environmental standards and high quality requirements.
Over 40 years experience in precision machining in civil and military aviation, missile, spatial and laser. Our modern and first quality machinery equipment ensure the production and precision from prototype to series. Qualifas Certification.
EMC2 is the leading French open innovation ecosystem dedicated to manufacturing.
Its community, which now has more than 380 members, tackles on a cooperative and open way, key challenges for industrial competitiveness. From design to industrialization, the EMC2 ecosystem excels in the processing of extra-large structural composite and metallic parts.
The unique ceramics cluster, certified "Competitiveness cluster" by the French Government since 2005. Based in Limoges and Toulouse Recognised as an expert in France Representing the ceramics sector The cluster leads its network in order to promote the innovation capacity of its 140 members: - Promotion of the know-how and products - Driving public-private partnerships - Arising, mouting and dissemination of innovative projects - Targeting and facilitating access to final markets
Aeropole de Picardie : an area dedicated to technology et real estate directly linked to airport and STELIA Aerospace.
POLYMEREXPERT is a private company specialized in research and development in the field of innovative polymers. From idea to industrialization, PolymerExpert uses its multidisciplinary and multisectoral skills for the benefit of companies in the industrial, aeronautical, medical and cosmetic sectors. In parallel, PolymerExpert develops its own technologies such as self-healing polymers, shape memory polymers, photochromic polymers...
POLYSOUDE specialises in the design and manufacture of equipment using modern TIG/GTAW & Plasma welding processes, complemented by a range of customised services: orbital welding, automated welding, weld overlay and related services
Polytec designs optical measurement equipment for non-destructive test : vibrometry, velocimetry, surface metrology, online spectrometry. Also distributor, Polytec completes its own offer with complementary product ranges in optics, machine vision, analytical processes, acoustics ... Polytec France supports all professionals in aerospace: modal analysis, vibration mapping, acoustics and vibration control, non-destructive testing, localization and characterization of sound sources, surface topography measurement...
With 30 years of experience in polyuerethan foam transformation, we are specilized in the production of technical products. We are already present in all cockpit Airbus range, we also equip the cabin area as passenger seats.
Powerex EMA, based in Le Mans (France), certified EN9100, is specialized in the development and production of power semiconductors (diodes, SCRs). Aeronautics represents 35% of its turnover. Through its partnership with Powerex Inc in the USA, Powerex EMA can also assist its customers in the development and distribution for demanding applications in Military/Aviation and Traction including Rectifiers and Thyristors, Custom modules SCRs, IGBTs, Diodes and HVIGBTS, Integrated POW-R-PAKs including Value Added Assembly and industry proven Silicon Carbide Packaging Expert. Powerex Inc is a USA based manufacturing company owned by two leaders in the Semiconductor Industry ( GE and Mitsubishi Electric),is AS9100 certified, aviation supplier for 30+ years.
WW leader on thermal spray business. Coatings produced by thermal spray, diffusion, electrolytical codeposition (Tribomet)and laser cladding. Finishing and control by dye penetrant or magnetic particles inspection.
Elaboration and sale of precision investment casting "lost wax process" Rapid prototyping Project manager of subsets Provision of metallurgical service of controls Provision of non destructive testing service of controls Provision of service of heat treat
PRODUCTYS provides full generic and scalable Manufacturing Execution System Solutions to Aeronautical Customers. Available on panel, tablet, smartphone, PRODUCTYS MES is the best zero paper software solution to provide immediately all reliable information to the operators, collect production and control data in exchange with ERP / PLM systems.
Precision mechanics. Painting Silkscreen Assembly. Front backlit Metrology works
PRONERGY, a subsidiary of the FAAR Group, specialized in power electronics, equipment for conversion, management and storage of energy, automation solutions and system integration. For more than 35 years, the company has position of expert in the design, validation and manufacturing of batteries, BMS, UPS, converters, test and automation equipment. A major player in its field, PRONERGY benefits from solid expertise in the military, nuclear, aeronautics, transport and other sectors, and responds to the needs for the manufacture of turnkey, custom-tailored equipment, regardless of its level of technical constraints, severe environment and performance.
Specialised in electrolytic and chemical processing, non destructive testing , paints and varnishes. PROTEC GROUPE is qualified by all the primes of aeronautic, spatial and armament. Accredited NADCAP for 18 Process ( NDT and Chemical Process )
QUASAR Solutions offers a comprehensive M.E.S software suite to help companies become smarter and more efficient... Many features (quality control, SPC, traceability, real time workshop management...) help capitalize all of your production data in a sole system linked to the company’s information system (ERP). QUASAR MES, it’s 9 modules to meet the needs of the MES in the company, covering the fields of quality, production, maintenance and data storage / analysis.
QUIRI Hydromécanique is designing and manufacturing industrial hydraulic equipments (cylinders, dampers,clamping, systems) for defense, energy, transport and aeronautic industries. The division is mastering all the skills linked to hydraulic technology: mechanical design, hydraulic design, control systems, machining, assembly and qualification test. QUIRI Hydromécanique also designs and manufactures servo-hydraulic test benches.
RFPM is specialized in precision machining (turning, milling, cylindrical and deep grinding) for small and medium series for more than 40 years - EN9100 certified
RABAS produces all types of small, medium and large series and mechanically assembles sub-assemblies in a variety of fields, such as the aeronautical and shipbuilding industry.
R&Dnano develops its own chrome-free coatings and surface treatments for: - steels, aluminum, magnesium... - functionalization of glasses, plastics and composites. The coatings provide, according to their formulations, surface strengthening, anti-scratch, antifriction, anti-abrasion, electrical conduction associated with transparency, adhesion, omniphobicity and antibacterial properties.
RDO Springs, one of the French leaders in the spring manufacturing will address complex issues related to design and industrial production of springs. Working especially for the pharmaceutical industry, specialized in surface treatment and packaging of stainless steel parts in clean room (ISO8), RDO Springs is focused on quality, traceability and process mastery. RDO Springs is a modern company, enjoying an efficient and flexible organization offering a high reactivity to its customers.
Created in 1946, REEL is an independent company employing 2000 people Anticipating and adapting to an evolving market and clients’ requirements Enjoying a strong international development for the last 20 years An Integrated engineering company for sectors where safety and reliability are major concerns Clients’ process objectives are placed at the centre of our organization: Together we find sustainable, technically and economically optimised solutions
Nouvelle-Aquitaine is home to the jewels of aeronautics, space and defence industries. These firms sustain a network of dynamic and successful SME’s. Co-founder of the Aerospace Valley World Competitiveness Cluster, the Nouvelle-Aquitaine's position is reinforced as a high-value-added industry land. As a major economic actor, Region Aquitaine concentrates its efforts on industrial development, especially for SMEs growth.
RESA is a company specialized in electronics manufacturing for space industry. RESA know-how covers very high reliability boards and control units manufacturing.
RESCOLL is an independant testing and research Company founded in 2001. Rescoll is involved in the study of innovative industrial applications of polymer materials : composites, adhesives, … as well as complex processes : adhesive bonding, surface treatments, … We also perform materials characterization throughout our laboratories : - Physiochemical analysis - Mechanical characterization - Fire and environnemental tests RESCOLL has NMMT NADCAP certification and is qualified by Airbus, Safran, ...
The Roux-Jourfier Group provides integrated solutions in products and technical services for industry to design, develop, optimize, maintain your means of production. Of the engineering in the maintenance, our teams gather expertizes and the culture of the continuous improvement ( PDCA) with a control of project management from the engineering to the customer on-site implementation. You have projects, we shall know how to make them concrete from A until Z.
Delivering products in more than 15 countries, employing 150 people, Rochette Industrie Group is a reference on the worldwide market of subcontractor for mechanical and hydraulic sub assemblies, integrated special processes and precision machining in key markets. Manufacturing the hydraulic and mechanical assemblies, Rochette Industrie Group answers to the technological and industriel challenges its customers have to face in an ever changing world. We support you with our flexibility and agility to face these challenges. Capable of integrating the whole product value chain in an international market, Rochette Industrie procure the material, machine as per drawing, integrate the special processes in house, assemble and test any customer design. Rochette Industrie Group is your key partner in any demanding environment. It’s financial strength guarantee the stability of its branches Cross fertilization of its talents improve its productivity Sharing good quality policies and practices accross the group guarantee best in class manufacturing
The company Rose plastic is well known for the development and production of intelligent packaging solutions made of plastic using injection and blow-moulding technology. Our product program includes a wide range of universally applicable standard packaging: Tubes, boxes, water- and dustproof cases with optional foam inserts. Customization of standard packaging is possible.
Specialized in high precision machining, SMP BAUDRY also manufactures complex mechanical assemblies for many sectors such as automotive, nuclear, food, weapons, robotics, oil, sport and aeronautics for which we produce small series of avionnable parts.
Industrial assembler, we are specialist in metal work, « mechanised welded » and industrial tinsmith. Our experience and knowledge were acquired for more than 50 years in this field. Our enlarged capabilities, allow us to be sub-contractor for single parts, complete integrated system up to turnkey projects.
A specialist in aeronautical tools, SACI is two core businesses are engineering and industrial equipment deployed in several sectors of activity such as aeronautics, rail, agri-food and other industries.
For 30 years SAFEL has been providing services : simulation / research / welding / maintenance / machines SAFEL is specialized in Laser and Electron beam. Certifications : ISO9001/EN9100/NADCAP and fiscal Credit Impôt Recherche.
SAIMAP-VIENNOT is the specialist in plastics processing for the aerospace industry. Components for aircraft, helicopter, missile and space launchers equipment and systems.
SAM OUTILLAGE is a French company, innovative and manufacturer. Concerned about the needs of its customers, SAM develops innovations to solve their problems. Come to discover on our stand the 1st mecatronic torque wrench that guarantees your tightening !
SAMS INDUSTRIES, created in 1967 (Paris), is specialized in small & large batches broaching, with a wide customer base mainly in aeronautics sector. Its know-how is also well recognised in design & manufacturing of broaches and cutting tools. On top of that, SAMS INDUSTRIES provides resharpening and repair services.
Made-to-measure solutions in SHOCKCORDS, STRAPS and NETS whatever projects in terms of hanging, suspending, damping, stowing, fixing, propulsion and catapult with FAR 25853, FMVSS302, ADB0031 certifications requirements. ►Shockcords up to dia 40 mm with high resistance, resisting to temperatures as from -60°C to +220°C, special elongations (up to 250 %), forces up to 600 daN, conductive and non-fire shockcords and on request ASNA 0243 and B.S. standards or U.S. Mil. Specifications. ►Straps (as from 8 mm up to 120 mm wide) elastic or not, high-resistant (Kevlar…), self-tearing and non-fire straps and assembled with fixing devices to our customers’ specifications. ► nets - Fireproof nets: Custom-made nets, available in any length, any width and with different mesh sizes. Our customers references : Airbus, STELIA Aerospace, DASSAULT Aviation, ZODIAC Aerospace, BE Aerospace, THALES, DGA, NEXTER, RENAULT VOLVO
Parts of aluminum alloy sand of precision and shell gravity modling. Development from prototypes to series. Member of a group of companies offering a complete service: casting, sheet metal, machining, assembly.
Since 1953, SAT has been designing and manufacturing customised industrial heating equipment:batch and continuous ovens & furnaces, composite curing lines, heat treatment solutions for light alloys, rotational & slush-moulding equipment.
REALIZATION OF MECHANICAL PARTS AND SUB-ASSEMBLIES BY MACHINING AND GRINDING MACHINING BY CHIPPINGS REMOVAL TOOLING IN SMALL SERIES
SBG Systems designs, manufactures and market a complete line of inertial sensors based on the state-of-the-art MEMS technology such as Attitude and Heading Reference System (AHRS), Inertial Measurement Unit (IMU), Inertial Navigation Systems with embedded GPS (INS/GPS), etc.
Based in Paris, SCEI is a distribution company that has been at the forefront of many projects in the field of composites and now offers a broad range of products and solutions for the use of composites in the aeronautics, Space et Defense sectors. Introduction and development of innovative technologies like 3D composite printers with continuous fiber of carbone, Kevlar and glass as well as High Temperature thermoplastics like PEEK, PEI (ULTEM 9085)... Presence in France, Europe, Maghreb countries and Asia.
Manufacture of mechanical parts milling 3, 4 and 5 axis, of turning 2, 3 and 4 axis and assembly.
SCS Concept, young and innovative company, was created in 2005. We are specialized in the development of measurement solutions for control or production such as dynamometric wrenches, data colectors, transducers and control benches. Thanks to its knowledge, SCS is able to adapt its devices to different industries or specific needs of its customers.
Sealicone designs and manufactures: Sealing systems, Textile products (sandow, elastics, ropes, plaits, belts, nets), Plastic parts by injection or machining, Metallic parts by machining or sheet-working, Springs, And sub-assembly with all our know-how (helmets, vests, seats, bags...)
HIGH PRECISION MACHINING AND ASSEMBLY OF MECHANICAL PARTS FOR AEROSPACE AND DEFENCE INDUSTRY
TRADE IN INDUSTRIAL SUPPLIES, SUPPLY TRANSPORT AND RECONDITIONING OF INGREDIENTS, OF CHEMICALS AND DANGEROUS PRODUCTS SUPPLY OF AERONAUTICAL SEALS (PARKER) AND AERONAUTICAL BEARINGS
Seine-et-Marne Attractivité is a development agency in Paris region with one aim: to support your business development in Seine-et-Marne. Learn all about the advantages to discover and exchange about our aeronautics sector...and more with Seine-et-Marne Aero. We provide advice and support to businesses in the following areas: partner search, corporate property, training and human resources... As usual, we are pleased to welcome you to the Seine-et-Marne Aero Stand - Paris Region Pavilion.
SERTA Aerospace & Defence is located in vast and functional premises close to Bordeaux-Mérignac International Airport. Design, industrialization and manufacturing of parts and aeronautical structures. SERTA ASD as a rank #1 supplier is your partner offer
SET SAS is manufacturer: - Accu-lube (lubrication) - Reamers - Drill barrels - Dague drill - End mills and form tools - End mills rivets - End mills by pulling & pushing - Chamfer end mills by pulling & pushing - End mills contourning - Drilling end mills tools - Brush to metallize - Deburring tools - Assembly Tools - Tools for the Composite - Tools for hard materials - Tools for aluminum - Deep drilling tools - Clamping chucks - Pneumatic assembly equipment
Treatment of chips by compacting systems.
Aeronautical subcontracting in heet metal forming, welding, structure assembly and Heat treatment.
Special tools manufacturer for fastener makers (cold forging, mid-heat forging, cutting) and special drilling guides for aircraft manufacturers and subcontractors.
Siderel is your trustfull partner for the manufacturing of equiped electronic cards, electronic cabling and assembly and Maintenance in Operational Condition. With over 25 years of experience with the aviation industry (out of which more than 10 years with the EN9100 certification) and highly experienced teams, we are able to accompany our clients on all their projects of prototypes, small an medium series. Our leitmotives: quality, reliability and reactivity.
Sifo Sogecom Industrie is a French manufacturer of special cutting tools and deformation parts (punches, matrixes ...), toolings (bushes, jigs...). With almost 50 years of experience, Sifo Sogecom Industrie's know-how enables it to work with the major contractors in the industry.
SIO offers a large variety of technical parts and advanced solutions in finishing, painting, marking, laser engraving, back-lit items. Our Quality procedures rank us as a leading company, with high quality requirements, such as: Aeronautics, Cosmetics, Railcars, Shipbuilding, Plastics and many other sectors specialized in advanced technologies.
SIVO, founded in 1974, has from the outset been dedicated to providing tools of excellence. UOP founded in 1966, Italian manufacturer with innovative solutions, in perpetual research and development brings its AS9100D certified skills in the study and manufacture of high-end cutting tools for the aerospace industry SIVO & UOP, in perfect philosophical and strategic complementarity, offers the market a technical, logistical and commercial platform to meet the challenges and demands of modern machining.
Tours Val de Loire Airport is an International airport in the French department of Indre-et-Loire, 6km north-northeast of the city of Tours. The airport is currently located at and leaning on the French Air Force’s air base and military flight training center. By a governmental decision, the airport’s military use is expected to terminate in July 2021 and the ownership of the platform (200 ha) will be transferred to the SMADAIT; a joint venture between various public authorities. The SMADAIT has expressed its willingness to develop the airport into an independent regional airport to create additional economic value for the metropole and the Loire Valley.
CNC Machining of insulation, plastics, laminations, light alloys and titanium. Polishing and joining. Since the end of 2018, Smide is part of the group Plastil, a family-owned company, specialised in plastics processing by precision machining, extrusion, blow moulding, injection moulding and cutting as well as post-production treatments.
In 1995, the worldwide broaching tool manufacturer SMOC INDUSTRIES was taken over by Emmanuel SAINT-SUPERY. It manufactures broaches since 1969. Following the growth in aeronautics new generation turbine (LEAP in Airbus A320 Neo, Boeing 787, Comac 919), the company builds on its high-skilled partner status to support its customers – such as SAFRAN – in their industrial challenges, particularly on new materials broaching.
Workholding toolings for machine-tools.
SNDMECA Industry Group is composed of SND and MECADISTRIBUTION and is specialized in the machining of mechanical parts and assemblies for all industrial sectors (aeronautics, oils field, nuclear, medical…). Certified ISO 9001, EN 9100 and PART 21 G, we support our customers from the creation of the product, the prototype manufacturing, the industrialization to the serial deliveries of final parts and assemblies. We have 33 digital machining machines and 5 electroerosion centres. Since the beginning of 2019, we have 800m² workshop available for developing our assembly activity.
SNIC design, manufacture and sell since 1963 high performance connectors & solutions. Well known for more than 30 years for their reliability in rail signalling applications, our solutions have been qualified in civil/military aeronautic fields and fire detection devices.
SNL is a subcontractor specialized in aeronautics and space and employs 42 people. Strong skills have been developed in 5-axis continuous machining of hard metal parts as well as turning and EDM machining. SNL is specialized in the production of flight parts (aeronautics and space), the production of models (eg for wind tunnel tests) and parts in 5 axes machining (turbine blades for energy and space).
STS provides solutions for aerospace subcontracting : composite and maintenance of assemblies, painting, electromechanical assembly and technical textiles cuttings. STS is an eco-responsible company that places the human in the center of his values. Since 1980, STS is certified "Adapted Enterprise", the company employe 80 % of employees with disabilities in the aeronautics subcontracting sector.
Thirty years of experience to design and to fit protection against shock and vibration for the largest national contractors. All over the world the capabilities and the experience developed in such exacting fields as space and defence, gave to SOCITEC the opportunity to be leader on its market.
SOKARIS INGENIERIE, created in 1999, is an engineering and consulting company specialized in optimization/mass-reduction and the development of complex mechanical systems, with a strong expertise in materials and manufacturing processes. We have expertise in the Following processes:Die casting/Forging, Thermoplastic injection molding with short fibers/Thermoforming, Additive manufacturing polymer & metal, Stamping, Long fibers thermoplastic stamping with dies. We also have strong competencies in complex calculation (modeling, Advanced simulation, topological optimization, parameters optimization). In parallel, our teamp develops software tools dedicated to customer's needs. Therefore, we can provide full technical support service from specifications to industrialization focusing on your main objectives: cost, mass reduction & performance.
For over 50 years, SOMEPIC Technology is the essential reference in precision engineering of small and medium series. Our company proposes you a quality offer ranging from elementary parts to assembly parts, so improving your cycle of manufacturing and allowing you to focus exclusively on the final assembly of your sub-assemblies. An alliance between know-how and mastery of high-tech tools to meet yours needs.
SOMOCAP offers you its know-how, in the area of rubber, composite, and thermoplastic technical parts created by molding. SOMOCAP shapes your innovations.
Drawing out of stainless steel and nickel alloys between 0.2 mm to 51 mm outside diameter. ISO 9001 v 2000/ en 9100
Subcontractor & service provider, multisector, civil & military, new & MRO, aerostructure & aerostructure & equipment & aircraft, composite & metallic.
SPI Aero is specialized : Non Destructive Testing, Surface Treatment, Shot Peening, Paint, Assembly all materials. Also composite machining.
SPIROTEC is your partner to offer complete solutions for your high quality gears: • Ground Spiral bevel gear sets, • Ground Crown gears (Face gears), • Worm gear sets. Owned by a German group, Spirotec relies on 35 years of experience and a state-of-the-art machinery park to design and manufacture your gears in small and medium series. Our competence is recognized in several high demanding sectors (rail, marine, etc.).
Subcontractor and integration, electronic, mechanical and optical manufacturing. Specificities: studies and manufacturing of embedded housing on ARINC standard; studies and manufacturing of IFE subsets; maintenance and repair of flight computers.
Stock holder and distributor of high performance alloys since 1928, STAINLESS specializes in the supply of copper alloys for the aerospace market. The product range includes Toughmet®, CuBe, Nickel Aluminum Bronzes, and High Tensile Brasses. Main applications: - Bushings and bearings for landing gears, aircraft doors, actuators, hydraulic systems, etc. - Pins and retaining clips for electric connectors. STAINLESS is EN9120 certified and GRAMS compliant (Airbus quality system)
Air captation and filtration specialist, STIVENT designs and manufactures global or autonomous solutions to deal with dusts - wood, metal, composite....- and solvents. Its know how and service quality allowed Stivent to work with big players from wood, aeronautic, nuclear, foundry or automotive industries. The development of solutions ensuring worker's protection and complying with ergonomics being at focal point, Stivent relies on its capacity to offer standard and complete solution as well as desgning taylormade offerings thus striving to answer its client's need.
STYX Technologies is an Engineering Service Company with expertise in Metal Additive simulation, Welding simulation Mechanical Design. - Services : feasability studies, technico-economical studies, numerical simulation (Prediction of residual stresses, distortion,...) - Products : ex-nihilo manufacturing, adding features on existing parts, repairing of damaged components
CNC MACHINING SERVICES : metals and composite materials Kits - Mechanical Assembly
Sud Industrie Service provides you with manufacturing and assembly of complex components -multi-material, multi-process and meets your specific aerospace requirements. Our specialty, function projects of sub-Assembly. We focus on providing cost to design, quality, project management and production optimization of aerospace sub-assemblies (precision machining & treatment, aluminium monoblocks, assembly, cabels and embedded electronics etc) from prototype to small or large series. We are equipped with robotic, semi-automatic assembly for Welding (Laser, TIG), Riveting, Screwing. Certified ISO 9001, ISO 14000, ISO IATF 16949 - EN 9100 in progress.
Born out of strong political will and supported by the partner local authorities,the Paris\Villaroche Aeronautics and Technology Park is now a major focus for the aeronautics industry. Within 45 minutes of the capital, it offers the full range of services expected of a major business, industry and economic development hub.Paris\Villaroche is a unique opportunity and has, at the heart of the site, an aerodrome open to business flights.
With a team of 48 associates, SYSTECH is specialized in electronic subcontracting. Created in 1991, the company includes an experimental technical team, with a quality problem-solving ability, guaranteeing a reactive service.
Screen Printing Company. All types of screen printed or engraved labels on metals and plastics. Impression techniques : flat-bed screen printing, chemical, laser and mechanical engraving, digital impression, cut-out letters, flat bed cutting. Materials used : Aluminum, Stainless Steel, Brass, all types of adhésives, polycarbonates....
TARAMM enable the use of Titanium and hight melting point alloys investment castings, inconel, Gamma TiAl... TARAMM is tier one supplier, SNECMA, TURBOMECA, AIRBUS, DASSAULT AVIATION... TARAMM has the capacity to cast thin thickness : duct, bearing support, fitting...
4 MAIN ACTIVITIES : - Vertical and horizontal turning, 5 axis milling : few cm to 21meters - few kg to 40 tons; - Design (integrated design office) and manufacturing of sub-assemblies, jigs and special machines; - Large CMM measurment: 4 x 3 x 2 meters; - Kitting
TARMAC AEROSAVE, the Biggest Aircraft Storage Company in Europe, is an EASA Part. 145 MRO dedicated to Aircraft Storage, Aircraft Maintenance, Aircraft and CFM56s engine Recycling. There are two facililtes (Tarbes in France (HQ) and Teruel in Spain). In total the company has a storage capacity of 250 aircrafts, three large aircraft hangars and 9000 sq meters for components storage. As an EASA Part 145 Tarmac Aerosave has all the approvals for Airbus, Boeing, ATR and Bombartier (CRJ 100-200) families.
The company specializes en two areas, the first : surface treatment, in particular the treatment os stainless steel, heat treatment in an aven and the second : cutting of water jet 5 axis, 5 axis in volume and by rotation (tube), plasma cutting, sawing and finishing, machining, design and production of parts from prototype to large series as well as specific equipments for companies.
On spec Equipment supplier , TDM develops embedded electronic systems. Our specialities include HD video (H264 encode/decode, Arinc818, SDI-SMPTE, DVI, GIGEVISION, COAXPRESS...) and wide band recorder (data and video). TDM participates in collaborative projects with large groups. TDM develops AI cameras for security purposes
Printed Circuits Boards Manufacturing High Technology Multilayers and Flex-Rigid HDI, Blind vias...Via Filling Copper Prototypes and Serial production volumes Aeronautic, Military and Industrial Applications Certification ISO 9001 / EN 9100 NADCAP Accreditation
For more than 25 years, TECH INDUSTRIES company has specialized in the manufacture of componants and sheet metal modulus assembly, mainly intended for aeronautical industry. TECH INDUSTRIES acquired experience in assembly of complex bom product, and developed a real know-how in the integration of modulus composed by various metal-processing.
TECHNIWAVE leader in RF & Microwave for design, development, industrialization and manufacturing. With a long know-how in the fields of aeronautics, defense and industry, TECHNIWAVE is a key partner for frequencies from DC to 90 GHz. Design on specifications, co-development Engineering, Consulting Integration and tests Maintenance in operational conditions.
TechwaY develops advanced embedded systems for Defense and Avionics markets. Our added value: we offer pre-integrated solutions that facilitate the use of complex technologies in order to reduce their cost. We offer high-end embedded systems and boards such as data-acquisition systems, high-speed recorders, rugged servers and ARINC818 solutions. All our products are the outcome of a close R&D collaboration with market leaders in Avionics such as Thales Group, Airbus Group, Safran and ONERA: the French Aerospace Lab.
TELERAD is 50 years old and is the french leader of the aéronautical communications. Our equipments are in service in more than 70 countries.
TFCM SA is specializing in industrial sheet-metal, technical sheet-metal and fine sheet-metal technologies. TFCM is involved in the rail, aeronautical, urban buses and electrical industries sectors for all operations metal assemblies or sub-assemblies.
THERMOCOMPACT specialist in common metalic surface coating and precious metals as gold, silver or rhodium. Total or selective plating, the company involves in every high-tech business field: Aeronautic, spatial, connectic, automotive. Thanks to our several certifications and ordering customers qualifications, we are able to have an adapted reactivity according our customer needs.
Specialist of the aeronautical subcontracting in sheet metal workshop, milling parts and weld assembly TISO can take care studies, manufacturing, assembly and control for Aeronautics, Medical, Nuclear power, Civil or military Defense. We use mainly the raw materials : steel, Stainless steel, Hastelloy, Inconel, Titanium, light Alloys. The TISO company is certified according ISO 9001 and EN9100 since mars 2002, certified for this quality management and this willingness to answer of his customers.
Designer & Manufacturer of cutting tools HSS / CARBURE / PCD for composite and aerospace applications. 7 manufacturing plants on 3 continents : USA - FRANCE - SPAIN - UK - CHINA - MEXICO / Designer & Manufacturer of a wide range of portable pneumatic tools, crowfeet for difficult screwing access, screwdrivers, drills and ADU
TOPSOLID, whose headquarters is located just outside Paris, France, is the software developer of the TopSolid CAD/CAM/ERP software range dedicated to the mechanical manufacturing, toolmaking, wood and sheetmetal industries. . In 2018 company turnover was €45M for 320 employees. Every year TOPSOLID invests in the region of 30% of its annual turnover in Research and Development for its integrated software range.
TRA-C INDUSTRIE-CREATE THE INDUSTRIAL INNOVATION Sector: Manufacturing and Industrial services Industry: Mechanical engineering and manufacturing TRA-C industrie, a French owned company since 2001, is a European leader in the metalworking definition, manufacture and installation with our innovative Friction Stir Welding (FSW). With first-mover advantages, we provide research and development, manufacturing machines and sub-contracting projects using high-tech FSW for customers’ demands.
Tronics is the only provider of both closed-loop MEMS Accelerometers and Gyros, offering superior linearity, increased signal to noise ratio and improved behavior under harsh vibrations, shocks and temperature environments. They are well suited for system manufacturers targeting applications with strong requirements such as precision navigation and stabilization, as well as motion control.
UF1 supports his customers in the development of their expertise in the machining technology by: - R & D studies in machining: Machining development and testing in order to control the machinability of new aeronautical materials, new cutting tools and machining technologies. - Machining process for industrialization services through technical assistance for NC programming, design and realization of fixtures and improved productivity. - Prototyping, small batches and fixtures.
Precision turning - 200 single spindle lathes Centerless cylindrical grinding (throughfeed and infeed) Second operation machining - honing (flat surfaces and bores) Manuel polishing and tribofinishing Microsandblasting - shotpeening Electro-polishing Heat treatment-Annealing of non-ferrous materials Dimensions 0.3 to 42mm 7 production and stocking sites
Give your industrial materials a second life ! With Valomat you may : - Sell your unused stock of metal - Buy metal from other companies : cheaper and faster More than 1 500 references to date : aluminium, titanium, inox, steel, copper...
Velocity Electronics is a global independent distributor, focusing since 20 years in obsolete and hard to find parts, managing obsolescence, testing according AS6081 certification. We can also offer distribution center and long storage partnership.
A complete range of Manufacturing Processes. Fruit of the technological innovations developed by Ventana and its partners, constituting as many combinations of our core businesses to adapt to our customers’ needs. Our mission: to conceive and implement effi cient manufacturing processes, which are increasingly more respectful of people and the environment.
Veolia Déconstruction France is specialized in the removal of asbestos, the demolition and the dismantling. Its specialized subsidiaries: VDSF, SEJOURNE, PETROFER SN and BARTIN AERO RECYCLING. BARTIN AERO RECYCLING provides aircraft dismantling, in accordance with regulations. It operates the dismantling of aircrafts on the first European platform for aerospace dismantling Deols (36) in France.
YOUR MULTIMEDIA EMBEDDED SOLUTIONS PARTNER : ON BOARD EQUIPMENT SUPPLIER - Video management & processing computers for SECURITY, SURVEILLANCE & ENTERTAINMENT - Design and manufacturing of H/W & and S/W systems in harsh environment : • Defense & Security • Aeronautics • Industry • Broadcast - Skills : • Electronic, FPGA, SOC and S/W development • Image, Video & Audio processing, Augmented Reality, Artificial Intelligence with machine learning • Interoperability, metadata STANAG 4609 • Streaming, recording, transcoding, replay
The NATAC developed by Voliris is an automatic air shuttle to carry 40-ft containers and up to 30 tons. Ultimately NATAC is a game changer as railways were, in the 19th century, for the American western territories. It is designed to facilitate in a sustainable way the economic development of uninhabited areas such as Sahara, Siberia, Mongolia, Australia, Arctic or Antarctic. By using unmanned aircraft and hybrid airship technologies, a NATAC aims at being the cheapest and most sustainable mean of transportation in areas where there are no roads. It is a flexible low cost airbridge. To transport 30,000 tons of freight per year (i.e. a truck per day), the NATAC air shuttle will be more cost effective than a traditional truck liaison when the cost of maintaining the road for the truck is taken into account.
New materials like titanium alloys or composites require high performance metal cutting tools, and Walter combines the best of industry standards and unique customization. The result is precise, efficient and economical : higher levels of process reliability, more material removal and optimum use of the machine.
Worldwide manufacturer and major partner for the aerospace industries, Charleville TC is the specialist within Wheelabrator Group for shot peening and accurate surface finishing technologies. With its unique experience, Charleville TC offers optimum solutions to your shot peening & blasting needs with an extensive array of efficient machines, clever peripheral equipments and advanced management systems.
WIKA, leader in pressure, temperature and level measurement, offers to the aeronautics industry its experience in instrumentation with turnkey solutions in: - Pressure: transmitters, pressure gauges, pressure switches, Air data test set, pressure indicators, pressure controllers ... - Temperature: probes, thermowells, transmitters, thermometers, ... - Level: level indicators, transmitters controllers, switches, ... - Flow rate: orifice plates, nozzles, Venturi tubes, Pito tubes, ... -Calibration for pressure and temperature: Calibration laboratory with COFRAC agreeme
Our story started in 2009 with the creation of XLM SERVICES company, specialized in consulting engineering for industrial and technical sectors. In 2015, the XLM CORPORATE group arose with its two subsidiaries : ADN MANUFACTURING, specialized in part manufacturing and 3D printing and XLM AERO. As for the company XLM AERO, it offers a broad range of services and solutions for airline with the Keys for Operations and Planning System (KEOPS).